My bad, I took a look at my math and realized I was wrong xd

Providing 240 water per minute could fill up the pipes and block the output of the Aluminum Scrap refinery at some point ?

Thank you for the blueprint. I used it as a starting point for my own blueprint and I did some improvements. See here: https://satisfactory-calculator.com/en/blueprints/index/details/id/4305/name/200+Aluminum+Ingots+%286x6+Grid%29+%5BSentinel%5D

The vertical conveyor belt at the upper 4 constructor entrances needs to be replaced with MK.1 and the two Assemblers are lowered to 66.7% so that the SiO2 does not clog

Eventually, the build stalls waiting on silica with refineries sitting idle.

Great blueprint Cyprium!! I've set my top foundries to 66.6667% which reduces silica requirements to 100 (2 x 50 per minute each foundry). I'm noticing I still cannot produce enough silica with my refineries below. Does anyone have a solution to this for this build?

replace the splitters below the top floor to smart splitters (with overflow to the smelters) so the scrap will feed the last machines first. They burn the silica. If there is left it will automatically use the smelters

Under-clocked the two foundries on the top but keep locking up with a Silica overload. Used a smart splitter and a Sink as a work around. Was wondering what I did wrong or if anyone else has a fix

Ornex, what settings did you put for the 2 foundries at the top?

Hey brutha, can i uplad it again with overclocked parts? ofc I will mention that you are the original owner.

66.667% on the unset foundries I think

Nearly perfect blueprint :) you just forgot to set the recipe (and underclock it) for the 2 foundrys at the top