Late game Alclad Aluminum Sheet Factory.

Focused on creating a clean, open, and walkable production floor and a well organized logistics floor. Inputs/Outputs are clearly marked and color/coded on the logistics floor. Power is connected to a Priority Power Switch on the logistics floor. This can be made more efficient with a different copper recipe, but I wanted to limit the inputs required. Waste water is recycled, so be sure to manually limit your water input to 288 m^3/min or it will back up. T1 Pump is there to prevent back flow on recycle line as valves are buggy, do not power it on.

I did not load balance the lines, so it will take some time to get to max efficiency. It's stable for 535 Output, if you want to use it for Heatsink Automation, after about two hours. 540 will take much longer unless you manually load the assemblers.

There are two labeled Smart Splitters on the logistics floor. One with the output so that you can route for automation and sinking. The second is on the Copper Ingot manifold, so that excess copper can be routed to sink if so desired.

Footprint:

• 17x16

Required Alt Recipes:

• Sloppy Alumina
• Pure Aluminum Ingot
• Pure Copper Ingot

Inputs:

• 600 Bauxite (One Pure Node w/ T3 Miner)
• 360 Coal
• 72 Copper
• 288 Water

Mods Required: None

Mods Used in Creation (but not required for use):

• Blueprint Designer Plus (Needed if you want to modify the print)
• Daisy Chain Everything (Grouped machines are daisy chained, then run through the floor.)

This is my first Blueprint Upload, please let me know what you think, if you have any suggestions, or if you want to me to add a second floor Heatsink Factory.

Rev: Fixed missing power cable in the Copper Ingot daisy chain.