Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Items count 39٬618
- Coordinates −25 / 85٬038
- Only paste on original location Yes
- دسته بندی ها Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
- Created on 3 دسامبر 2023، 16:12:18
- Last updated on 12 دسامبر 2023، 1:21:33
- دیوار ساده 4m 5٬084
- دیوار ساده 4m 3٬055
- فونداسیون 1m 2٬937
- قاب فونداسیون 1٬579
- تسمه نقاله مدل 5 1٬472
- تیرآهن 1٬267
- دیوار کج 4m 1٬166
- تابلو اعلان 4m 1٬070
- دیوار ساده 4m 823
- اتصالگر تیر 813
- تابلو پرتره 792
- بیلبورد کوچک 696
- دیوار کج 8m 670
- خط برق 665
- فونداسیون 1m 645
- قاب کف 579
- تسمه نقاله بالابر مدل 5 529
- تابلو مربعی 1m 474
- تابلو مربعی 0.5m 463
- بیلبورد بزرگ 461
- قاب دیوار 459
- فونداسیون 1m 457
- تیر رنگ شده 448
- دیوار کج گوشه 8m 446
- دیوار کج 8m 441
- دیوار کج 4m 403
- قاب پنجره شش ضلعی 393
- حفره کف تسمه نقاله بالابر 332
- وصل کننده تسمه نقاله 322
- تابلو نمایش 315
- رمپ دوتایی 2m 300
- فونداسیون 1m 293
- نیمه فوندانسیون 1m 281
- پریز برق مدل 1 278
- تسمه نقاله مدل 1 276
- خط لوله مدل 1 267
- نگه دارنده تسمه نقاله 242
- میان ستون فلزی 229
- دیوار ساده 1m 221
- بام 1m 216
- دیوار ساده 1m 210
- تسمه نقاله بالارونده مدل 1 207
- دیوار ساده 1m 203
- دیوار کج مقعر 4m 196
- دیوار رمپی 8m 188
- جدا کننده هوشمند 179
- خط لوله مدل 1 ( بدون مشخصه) 161
- ستون بزرگ فلزی 153
- رمپ دوتایی 2m 152
- دیواره رمپ معکوس 8m 148
- دیوار کج گوشه 4m 134
- انباری صنعتی 129
- فونداسیون 1m 118
- بام تخت 114
- اتصال سقفی تسمه نقاله 111
- نرده کشی مدرن 105
- پشتیبان دیواری هایپر تیوپ 98
- ستون بتنی بزرگ 96
- هایپر تیوپ 93
- دیوار رمپی 4m 88
- بام 4m 86
- دیوار کج گوشه 4m 86
- پشتیبان خط لوله 85
- ستون بتنی کوچک 84
- دیوار کج 4m 82
- لامپ سقفی 79
- اتصال دیواری تسمه نقاله 71
- بافر سیالات 70
- ورودی هایپر تیوپ 69
- دیواره رمپ معکوس 4m 68
- جدا کننده تسمه نقاله 67
- پشتیبان لوله های دیواری 64
- دروازه خودکار 60
- تسمه نقاله مدل 3 58
- حفره کف خط لوله 58
- چند راهی خط لوله 58
- نیمه فوندانسیون 1m 45
- بام 2m 44
- دیوار کج 8m 44
- رمپ 4m 43
- نورافکن دیواری 43
- دیوار رمپ معکوس 1m 42
- پورت پهپاد 42
- بام تخت 41
- راهرو رمپ 40
- تسمه نقاله بالابر مدل 2 40
- تابلو مربعی 2m 37
- نیمه فوندانسیون 1m 33
- سوراخ دیواری خطوط لوله 33
- نیمه فوندانسیون 1m 30
- تسمه نقاله مدل 2 29
- بام تخت 28
- پنجره تقویت شده 28
- جدا کننده قابل برنامه ریزی 28
- میله تسمه نقاله پایه دار 25
- پشتیبان هایپر تیوپ 25
- بام 2m 24
- اتصالگر دوتایی تیر 23
- رمپ گوشه بالارو 1m 22
- بام 1m 22
- کانتینر انبار 22
- دیواره تسمه نقاله دار 2x 20
- پنجره تمام قاب 20
- سوراخ کفی هایپر تیوپ 20
- راهرو مستقیم 19
- رمپ دوتایی 4m 18
- دیوار رمپی 1m 18
- راهرو گوشه 18
- تسمه نقاله بالابر مدل 3 18
- پالایشگاه 17
- تسمه نقاله مدل 4 17
- بام 1m 16
- بام 2m 16
- بسته بندی کننده 16
- دستگاه سازنده 15
- رمپ دوتایی 8m 14
- دیوار رمپ معکوس 2m 14
- دیوار رمپ معکوس 1m 14
- پایه لوله قابل جمع شدن 14
- حفره دیواری هایپر تیوپ 14
- پریز دو تایی برق مدل 1 14
- تابلو اعلان 2m 13
- اسمبل کننده 13
- افزونه گوشه دار داخلی 1m 12
- دیوار رمپی 1m 12
- دیواره تسمه نقاله دار 3x 11
- قاب فونداسیون شیشهایی 10
- نیمه فوندانسیون 1m 10
- پنل مدیریت منابع نوری 10
- دیوار رمپی 8m 10
- رمپ 1m 9
- فونداسیون 2m 9
- دیوار دروازه دار 9
- دیوار رمپی 4m 9
- تیر برق مدل 1 9
- رمپ معکوس 1m 8
- پمپ خط لوله مدل 2 7
- دکل برق 7
- بام 4m 6
- دیواره تسمه نقاله دار 1x 6
- دیواره تسمه نقاله دار 2x 6
- دیوار در وسط 5
- دیواره تسمه نقاله دار 1x 5
- دیوار رمپی 4m 5
- رمپ گوشه پایین رو 2m 4
- بام گوشه دار خارجی 2m 4
- دیوار رمپی 2m 4
- راهرو پله 4
- سینک باحال 4
- سکو واگن باری 4
- رمپ معکوس 2m 3
- دیوار رمپی 2m 3
- دیواره رمپ معکوس 4m 3
- مخلوط کن 3
- تولید کننده 3
- تیر برق مدل 3 3
- تیر برق مدل 2 3
- فونداسیون 4m 2
- رمپ 4m 2
- رمپ گوشه پایین رو 4m 2
- رمپ گوشه بالارو 4m 2
- رمپ 2m 2
- بام 4m 2
- بام گوشه دار خارجی 4m 2
- پشتیبان تیر 2
- دیواره رمپ معکوس 4m 2
- دیوار کج مقعر 4m 2
- دیوار دروازه دار 2
- دیوار با در جانبی 2
- ریل کشی صنعتی 2
- تابلو اعلان 3m 2
- استخراج گر چاه منابع 2
- استخراج کننده آب 2
- کوره 2
- تسمه نقاله بالابر مدل 4 2
- گوشه بالا محور معکوس شده 1m 1
- بام گوشه دار خارجی 4m 1
- دیوار با در جانبی 1
- دیوار دروازه دار 1
- دیوار کج گوشه 4m 1
- دیواره تسمه نقاله دار 3x 1
- دیوار رمپ معکوس 1m 1
- دیوار با در جانبی 1
- دیوار در وسط 1
- نردبان 1
- میز ساخت و ساز 1
- میز تجهیزات 1
- طرحواره ساز 1
- فشار دهنده چاه منابع 1
- پد پرشی 1
- صفحه فرود ژلهای 1
- پمپ خط لوله مدل 1 1
- ایستگاه قطار 1
- علامت توقف 1
- سویئچ برق 1
- بتن 63٬202
- تیر فولادی 17٬979
- کریستال کوارتز 17٬010
- ورق مسی 14٬070
- ورق آهن 9٬536
- تیر آهن با روکش صنعتی 8٬251
- سیم سرعت بالا 5٬207
- ورق آهنی تقویت شده 5٬114
- صفحات آلومینیوم مقاوم 4٬630
- لوله فولادی 3٬884
- میله آهنی 3٬318
- اسیلاتور کریستالی 3٬001
- سیم 2٬871
- پوشش کاری آلومینیومی 2٬250
- کابل 1٬599
- فریم ماژولار سنگین 956
- سیلیکا 882
- کانکتور با سرعت بالا 849
- روتور 712
- واحد کنترل گر رادیویی 435
- پلاستیک 386
- فریم ماژولار 365
- موتور 357
- لاستیک 219
- محدود کننده AI 210
- زیست توده 200
- سوپر کامپیوتر 28
- کامپیوتر 16
- برد مدار چاپی 2
-
Yokmosho - 2 آوریل 2024، 2:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25 مارس 2024، 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10 دسامبر 2023، 2:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10 دسامبر 2023، 2:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 9 دسامبر 2023، 3:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 7 دسامبر 2023، 0:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )