Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Nombre d'objets 39 618
- Coordonnées -25 / 85 038
- Coller uniquement à l'emplacement d'origine Yes
- Catégories Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Évaluation
2 / 5
- Version 269 772
- Auteur Yokmosho
- Télécharger (431x) Télécharger
- Taille du fichier 2,13 MB
- Created on 3 déc. 2023 16:12:18
- Dernière mise à jour le 12 déc. 2023 01:21:33
- Mur 4m 5 084
- Mur 4m 3 055
- Fondation 1m 2 937
- Fondation en charpente métallique 1 579
- Convoyeur Mk.5 1 472
- Poutre métallique 1 267
- Mur incliné 4m 1 166
- Panneau d'étiquetage 4m 1 070
- Mur 4m 823
- Connectique pour poutre 813
- Panneau vertical 792
- Petit panneau d'affichage 696
- Mur incliné 8m 670
- Ligne électrique 665
- Fondation 1m 645
- Sol en charpente métallique 579
- Convoyeur vertical Mk.5 529
- Panneau carré 1m 474
- Panneau carré 0.5m 463
- Grand panneau d'affichage 461
- Mur en charpente métallique 459
- Fondation 1m 457
- Poutre peinte 448
- Coin de mur incliné 8m 446
- Mur incliné 8m 441
- Mur incliné 4m 403
- Cadre de fenêtre hexagonal 393
- Passage de sol pour convoyeurs verticaux 332
- Groupeur de convoyeurs 322
- Panneau d'affichage 315
- Double rampe 2m 300
- Fondation 1m 293
- Demi-fondation 1m 281
- Prise murale Mk.1 278
- Convoyeur Mk.1 276
- Pipeline Mk.1 267
- Pylône de convoyeur 242
- Petit pilier en métal 229
- Mur 1m 221
- Toit 1m 216
- Mur 1m 210
- Convoyeur vertical Mk.1 207
- Mur 1m 203
- Mur concave incliné 4m 196
- Rampe murale 8m 188
- Répartiteur intelligent 179
- Pipeline Mk.1 (sans indicateur) 161
- Grand pilier en métal 153
- Double rampe 2m 152
- Rampe murale inversée 8m 148
- Coin de mur incliné 4m 134
- Conteneur industriel 129
- Fondation 1m 118
- Toit plat 114
- Support de plafond pour convoyeur 111
- Garde-corps modernes 105
- Support mural pour hypertube 98
- Grand pilier en béton 96
- Hypertube 93
- Rampe murale 4m 88
- Toit 4m 86
- Coin de mur incliné 4m 86
- Support pour pipeline 85
- Petit pilier en béton 84
- Mur incliné 4m 82
- Plafonnier 79
- Support mural pour convoyeur 71
- Réservoir 70
- Entrée pour hypertube 69
- Rampe murale inversée 4m 68
- Répartiteur de convoyeurs 67
- Support mural pour pipeline 64
- Porte automatique 60
- Convoyeur Mk.3 58
- Passage de sol pour pipelines 58
- Croisement de pipeline 58
- Demi-fondation 1m 45
- Toit 2m 44
- Mur incliné 8m 44
- Rampe 4m 43
- Projecteur mural 43
- Rampe murale inversée 1m 42
- Héliport 42
- Toit plat 41
- Rampe de Passerelle 40
- Convoyeur vertical Mk.2 40
- Panneau carré 2m 37
- Demi-fondation 1m 33
- Trou mural pour pipeline 33
- Demi-fondation 1m 30
- Convoyeur Mk.2 29
- Toit plat 28
- Fenêtre renforcée 28
- Répartiteur programmable 28
- Pylône de convoyeur empilable 25
- Support pour hypertube 25
- Toit 2m 24
- Connectique pour deux poutres 23
- Rampe d'angle hauteur 1m 22
- Toit 1m 22
- Conteneur de stockage 22
- Mur avec passage de 2 convoyeurs 20
- Cadre de fenêtre entier 20
- Passage de sol pour hypertubes 20
- Passerelle droite 19
- Double rampe 4m 18
- Rampe murale 1m 18
- Passerelle d'angle 18
- Convoyeur vertical Mk.3 18
- Raffinerie 17
- Convoyeur Mk.4 17
- Toit 1m 16
- Toit 2m 16
- Packageur 16
- Constructeur 15
- Double rampe 8m 14
- Rampe murale inversée 2m 14
- Rampe murale inversée 1m 14
- Support de pipeline empilable 14
- Trou mural pour hypertube 14
- Double prise murale Mk.1 14
- Panneau d'étiquetage 2m 13
- Assembleuse 13
- Extension de coin interne 1m 12
- Rampe murale 1m 12
- Mur avec passage de 3 convoyeurs 11
- Fondation en verre 10
- Demi-fondation 1m 10
- Panneau de contrôle des lumières 10
- Rampe murale 8m 10
- Rampe 1a 9
- Fondation 2m 9
- Mur avec grande porte 9
- Rampe murale 4m 9
- Poteau électrique Mk.1 9
- Rampe inversée 1m 8
- Pompe de Pipeline Mk.2 7
- Pylône électrique 7
- Toit 4m 6
- Mur avec passage de 1 convoyeur 6
- Mur avec passage de 2 convoyeurs 6
- Mur avec porte centrale 5
- Mur avec passage de 1 convoyeur 5
- Rampe murale 4m 5
- Coin de rampe bas 2m 4
- Coin de toit externe 2m 4
- Rampe murale 2m 4
- Escalier de Passerelle 4
- Broyeur A.W.E.S.O.M.E. 4
- Plateforme de chargement 4
- Rampe inversée 2m 3
- Rampe murale 2m 3
- Rampe murale inversée 4m 3
- Mélangeur 3
- Façonneuse 3
- Poteau électrique Mk.3 3
- Poteau électrique Mk.2 3
- Fondation 4m 2
- Rampe 4m 2
- Coin de rampe bas 4m 2
- Coin de rampe haut 4m 2
- Rampe 2m 2
- Toit 4m 2
- Coin de toit externe 4m 2
- Support de poutre 2
- Rampe murale inversée 4m 2
- Mur concave incliné 4m 2
- Mur avec grande porte 2
- Mur avec porte latérale 2
- Garde-corps industriels 2
- Panneau d'étiquetage 3m 2
- Extracteur de puits de ressources 2
- Pompe à eau 2
- Fonderie 2
- Convoyeur vertical Mk.4 2
- Coin haut inversé 1m 1
- Coin de toit externe 4m 1
- Mur avec porte latérale 1
- Mur avec grande porte 1
- Coin de mur incliné 4m 1
- Mur avec passage de 3 convoyeurs 1
- Rampe murale inversée 1m 1
- Mur avec porte latérale 1
- Mur avec porte centrale 1
- Échelle 1
- Établi 1
- Atelier d'équipement 1
- Modeleur Ficsit 1
- Pressuriseur 1
- Tremplin 1
- Coussin d'atterrissage en gelée 1
- Pompe de Pipeline Mk.1 1
- Gare ferroviaire 1
- Signal de bloc 1
- Interrupteur 1
- Béton 63 202
- Poutre en acier 17 979
- Cristal de quartz 17 010
- Tôle de cuivre 14 070
- Plaque de fer 9 536
- Poutre en béton armé 8 251
- Filactif 5 207
- Plaque de fer renforcée 5 114
- Tôle d'aluminium en alliage Alclad 4 630
- Tuyau en acier 3 884
- Tige de fer 3 318
- Oscillateur à cristal 3 001
- Fil électrique 2 871
- Boîtier en aluminium 2 250
- Câble 1 599
- Cadre modulaire lourd 956
- Silice 882
- Connecteur haute vitesse 849
- Rotor 712
- Unité de contrôle radio 435
- Plastique 386
- Cadre modulaire 365
- Moteur 357
- Caoutchouc 219
- Contrôleur d'I.A. 210
- Biomasse 200
- Supercalculateur 28
- Ordinateur 16
- Circuit imprimé 2
-
Yokmosho - 2 avr. 2024 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25 mars 2024 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10 déc. 2023 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10 déc. 2023 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 9 déc. 2023 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 7 déc. 2023 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )