Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- アイテム数 39,618
- 座標 -25 / 85,038
- 元の位置にのみペースト可能 Yes
- カテゴリー Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
- Created on 2023/12/03 16:12:18
- Last updated on 2023/12/12 1:21:33
- 標準の壁 4m 5,084
- 標準の壁 4m 3,055
- 土台 1m 2,937
- フレーム土台 1,579
- コンベア・ベルトMk.5 1,472
- 金属梁 1,267
- 傾斜壁 4m 1,166
- ラベル看板 4m 1,070
- 標準の壁 4m 823
- 梁接合部 813
- アイコン看板 792
- 小型看板 696
- 傾斜壁 8m 670
- 電線 665
- 土台 1m 645
- 床フレーム 579
- コンベアリフトMk.5 529
- 正方形の看板 1m 474
- 正方形の看板 0.5m 463
- 大型看板 461
- 壁フレーム 459
- 土台 1m 457
- 塗装梁 448
- 傾斜壁・コーナー 8m 446
- 傾斜壁 8m 441
- 傾斜壁 4m 403
- 六角フレーム窓 393
- コンベア・リフト用の床穴 332
- コンベア合流機 322
- 展示看板 315
- ダブル・スロープ 2m 300
- 土台 1m 293
- 半土台 1m 281
- 壁用電源差込口Mk.1 278
- コンベア・ベルトMk.1 276
- パイプラインMk.1 267
- コンベア・ポール 242
- 小型金属柱 229
- 標準の壁 1m 221
- 屋根 1m 216
- 標準の壁 1m 210
- コンベアリフトMk.1 207
- 標準の壁 1m 203
- 傾斜壁・凹型 4m 196
- スロープの壁 8m 188
- スマート分岐機 179
- パイプラインMk.1 (インジケーターなし) 161
- 大型金属柱 153
- ダブル・スロープ 2m 152
- 逆スロープの壁 8m 148
- 傾斜壁・コーナー 4m 134
- 産業用貯蔵コンテナ 129
- 土台 1m 118
- 平屋根 114
- コンベア天井用マウント 111
- モダンな手すり 105
- 壁用ハイパーチューブ支柱 98
- 大型コンクリート柱 96
- ハイパーチューブ 93
- スロープの壁 4m 88
- 屋根 4m 86
- 傾斜壁・コーナー 4m 86
- パイプライン支柱 85
- 小型コンクリート柱 84
- 傾斜壁 4m 82
- 天井灯 79
- コンベア壁用マウント 71
- 液体タンク 70
- ハイパーチューブ入り口 69
- 逆スロープの壁 4m 68
- コンベア分岐機 67
- 壁用パイプライン支柱 64
- 自動ゲート 60
- コンベアベルトMk.3 58
- パイプライン用の床穴 58
- パイプライン十字分岐 58
- 半土台 1m 45
- 屋根 2m 44
- 傾斜壁 8m 44
- スロープ 4m 43
- 壁付投光器 43
- 逆スロープの壁 1m 42
- ドローンポート 42
- 平屋根 41
- 作業用通路・スロープ 40
- コンベアリフトMk.2 40
- 正方形の看板 2m 37
- 半土台 1m 33
- パイプライン用の壁穴 33
- 半土台 1m 30
- コンベア・ベルトMk.2 29
- 平屋根 28
- 強化窓 28
- プログラム式分岐機 28
- コンベア・ポール・スタック可能 25
- ハイパーチューブ支柱 25
- 屋根 2m 24
- 梁接合部・ダブル 23
- コーナースロープ・上 1m 22
- 屋根 1m 22
- 貯蔵コンテナ 22
- コンベア壁 x2 20
- フルフレーム窓 20
- ハイパーチューブ用の床穴 20
- 作業用通路・階段 19
- ダブル・スロープ 4m 18
- スロープの壁 1m 18
- 作業用通路・コーナー 18
- コンベアリフトMk.3 18
- 精製機 17
- コンベアベルトMk.4 17
- 屋根 1m 16
- 屋根 2m 16
- 充填機 16
- 製作機 15
- ダブル・スロープ 8m 14
- 逆スロープの壁 2m 14
- 逆スロープの壁 1m 14
- パイプライン支柱(スタック可能) 14
- ハイパーチューブ用の壁穴 14
- 壁両面用電源Mk.1 14
- ラベル看板 2m 13
- 組立機 13
- コーナー・エクステンション内向き 1m 12
- スロープの壁 1m 12
- コンベア壁 x3 11
- ガラスフレーム土台 10
- 半土台 1m 10
- 照明コントロールパネル 10
- スロープの壁 8m 10
- スロープ 1m 9
- 土台 2m 9
- ゲートホール 9
- スロープの壁 4m 9
- 電柱Mk.1 9
- 逆スロープ 1m 8
- パイプラインポンプMk.2 7
- 送電塔 7
- 屋根 4m 6
- コンベア壁 x1 6
- コンベア壁 x2 6
- ドア付き壁・中央 5
- コンベア壁 x1 5
- スロープの壁 4m 5
- コーナースロープ・下 2m 4
- 屋根・外向きコーナー 2m 4
- スロープの壁 2m 4
- 作業用通路・階段 4
- AWESOMEシンク 4
- 貨物プラットフォーム 4
- 逆スロープ 2m 3
- スロープの壁 2m 3
- 逆スロープの壁 4m 3
- 混合機 3
- 製造機 3
- 電柱Mk.3 3
- 電柱Mk.2 3
- 土台 4m 2
- スロープ 4m 2
- コーナースロープ・下 4m 2
- コーナースロープ・上 4m 2
- スロープ 2m 2
- 屋根 4m 2
- 屋根・外向きコーナー 4m 2
- 梁支持部 2
- 逆スロープの壁 4m 2
- 傾斜壁・凹型 4m 2
- ゲートホール 2
- ドア付き壁・横 2
- 産業用手すり 2
- ラベル看板 3m 2
- 地下資源抽出機 2
- 揚水ポンプ 2
- 製錬炉 2
- コンベアリフトMk.4 2
- 逆コーナー・上 1m 1
- 屋根・外向きコーナー 4m 1
- ドア付き壁・横 1
- ゲートホール 1
- 傾斜壁・コーナー 4m 1
- コンベア壁 x3 1
- 逆スロープの壁 1m 1
- ドア付き壁・横 1
- ドア付き壁・中央 1
- はしご 1
- 工作台 1
- 装備品作業場 1
- ブループリント・デザイナー 1
- 資源井加圧機 1
- ジャンプパッド 1
- Uジェル・着地パッド 1
- パイプラインポンプMk.1 1
- 駅 1
- ブロック信号 1
- 電源スイッチ 1
- コンクリート 63,202
- 鋼梁 17,979
- 石英結晶 17,010
- 銅板 14,070
- 鉄板 9,536
- コンクリート被覆型鋼梁 8,251
- クイックワイヤー 5,207
- 強化鉄板 5,114
- アルクラッド・アルミシート 4,630
- 鋼管 3,884
- 鉄のロッド 3,318
- 水晶発振器 3,001
- ワイヤー 2,871
- アルミ筐体 2,250
- ケーブル 1,599
- ヘビー・モジュラー・フレーム 956
- シリカ 882
- 高速コネクター 849
- ローター 712
- 無線制御ユニット 435
- プラスチック 386
- モジュラー・フレーム 365
- モーター 357
- ゴム 219
- AIリミッター 210
- バイオマス 200
- スーパーコンピューター 28
- コンピューター 16
- 回路基板 2
-
Yokmosho - 2024/04/02 2:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 2024/03/25 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 2023/12/10 2:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 2023/12/10 2:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 2023/12/09 3:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 2023/12/07 0:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )