Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- 아이템 수 39,618
- 좌표 -25 / 85,038
- 기본 위치에만 붙여넣기 Yes
- 분류 Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
- 생성일: 2023. 12. 3. 오후 4:12:18
- 마지막 업데이트: 2023. 12. 12. 오전 1:21:33
- 기본 벽 4m 5,084
- 기본 벽 4m 3,055
- 토대 1m 2,937
- 프레임 토대 1,579
- 컨베이어 벨트 Mk.5 1,472
- 금속 빔 1,267
- 경사진 벽 4m 1,166
- 라벨 전광판 4m 1,070
- 기본 벽 4m 823
- 빔 연결부 813
- 안내판 792
- 소형 광고판 696
- 경사진 벽 8m 670
- 송전선 665
- 토대 1m 645
- 프레임 바닥 579
- 컨베이어 리프트 Mk.5 529
- 사각 전광판 1m 474
- 사각 전광판 0.5m 463
- 대형 광고판 461
- 프레임 벽 459
- 토대 1m 457
- 도색된 빔 448
- 경사진 모퉁이 벽 8m 446
- 경사진 벽 8m 441
- 경사진 벽 4m 403
- 육각 프레임 창문 393
- 컨베이어 리프트 바닥 구멍 332
- 컨베이어 병합기 322
- 야외 전광판 315
- 이중 경사로 2m 300
- 토대 1m 293
- 절반 토대 1m 281
- 벽 부착형 전신주 Mk.1 278
- 컨베이어 벨트 Mk.1 276
- 파이프라인 Mk.1 267
- 컨베이어 기둥 242
- 소형 금속 기둥 229
- 기본 벽 1m 221
- 지붕 1m 216
- 기본 벽 1m 210
- 컨베이어 리프트 Mk.1 207
- 기본 벽 1m 203
- 경사진 오목한 벽 4m 196
- 경사로 벽 8m 188
- 선별 분배기 179
- 파이프라인 Mk.1 (유량기 없음) 161
- 대형 금속 기둥 153
- 이중 경사로 2m 152
- 역방향 경사로 벽 8m 148
- 경사진 모퉁이 벽 4m 134
- 산업용 저장 컨테이너 129
- 토대 1m 118
- 수평 지붕 114
- 컨베이어 천장 지지대 111
- 현대식 난간 105
- 하이퍼튜브 벽 지지대 98
- 대형 콘크리트 기둥 96
- 하이퍼튜브 93
- 경사로 벽 4m 88
- 지붕 4m 86
- 경사진 모퉁이 벽 4m 86
- 파이프라인 지지대 85
- 소형 콘크리트 기둥 84
- 경사진 벽 4m 82
- 천장등 79
- 컨베이어 벽 지지대 71
- 유체 완충기 70
- 하이퍼튜브 입구 69
- 역방향 경사로 벽 4m 68
- 컨베이어 분배기 67
- 파이프라인 벽 지지대 64
- 자동화 게이트 60
- 컨베이어 벨트 마크 3 58
- 파이프라인 바닥 구멍 58
- 파이프라인 접합부 58
- 절반 토대 1m 45
- 지붕 2m 44
- 경사진 벽 8m 44
- 경사로 4m 43
- 벽 부착형 투광 조명 43
- 역방향 경사로 벽 1m 42
- 드론 포트 42
- 수평 지붕 41
- 캣워크 경사로 40
- 컨베이어 리프트 Mk.2 40
- 사각 전광판 2m 37
- 절반 토대 1m 33
- 파이프라인 벽 구멍 33
- 절반 토대 1m 30
- 컨베이어 벨트 Mk.2 29
- 수평 지붕 28
- 보강된 창문 28
- 다중 선별 분배기 28
- 적층형 컨베이어 기둥 25
- 하이퍼튜브 지지대 25
- 지붕 2m 24
- 빔 이중 연결부 23
- 오르막 모퉁이 경사로 1m 22
- 지붕 1m 22
- 저장 컨테이너 22
- 컨베이어 벽 x2 20
- 꽉찬 프레임 창문 20
- 하이퍼튜브 바닥 구멍 20
- 캣워크 직선 19
- 이중 경사로 4m 18
- 경사로 벽 1m 18
- 캣워크 모퉁이 18
- 컨베이어 리프트 Mk.3 18
- 정제소 17
- 컨베이어 벨트 Mk.4 17
- 지붕 1m 16
- 지붕 2m 16
- 포장기 16
- 제작기 15
- 이중 경사로 8m 14
- 역방향 경사로 벽 2m 14
- 역방향 경사로 벽 1m 14
- 적층형 파이프라인 지지대 14
- 하이퍼튜브 벽 구멍 14
- 이중 벽 부착형 출력부 Mk.1 14
- 라벨 전광판 2m 13
- 조립기 13
- 내부 모퉁이 확장형 1m 12
- 경사로 벽 1m 12
- 컨베이어 벽 x3 11
- 유리 프레임 토대 10
- 절반 토대 1m 10
- 조명 제어판 10
- 경사로 벽 8m 10
- 경사로 1m 9
- 토대 2m 9
- 게이트 벽 9
- 경사로 벽 4m 9
- 전신주 Mk.1 9
- 역방향 경사로 1m 8
- 파이프라인 펌프 Mk.2 7
- 송전탑 7
- 지붕 4m 6
- 컨베이어 벽 x1 6
- 컨베이어 벽 x2 6
- 중앙 문 벽 5
- 컨베이어 벽 x1 5
- 경사로 벽 4m 5
- 내리막 모퉁이 경사로 2m 4
- 외부 모퉁이 지붕 2m 4
- 경사로 벽 2m 4
- 캣워크 계단 4
- A.W.E.S.O.M.E. 싱크 4
- 화물 플랫폼 4
- 역방향 경사로 2m 3
- 경사로 벽 2m 3
- 역방향 경사로 벽 4m 3
- 혼합기 3
- 제조기 3
- 전신주 Mk.3 3
- 전신주 Mk.2 3
- 토대 4m 2
- 경사로 4m 2
- 내리막 모퉁이 경사로 4m 2
- 오르막 모퉁이 경사로 4m 2
- 경사로 2m 2
- 지붕 4m 2
- 외부 모퉁이 지붕 4m 2
- 빔 지지대 2
- 역방향 경사로 벽 4m 2
- 경사진 오목한 벽 4m 2
- 게이트 벽 2
- 측면 문 벽 2
- 공장 난간 2
- 라벨 전광판 3m 2
- 자원정 추출기 2
- 물 추출기 2
- 제련기 2
- 컨베이어 리프트 Mk.4 2
- 역방향 오르막 모퉁이 1m 1
- 외부 모퉁이 지붕 4m 1
- 측면 문 벽 1
- 게이트 벽 1
- 경사진 모퉁이 벽 4m 1
- 컨베이어 벽 x3 1
- 역방향 경사로 벽 1m 1
- 측면 문 벽 1
- 중앙 문 벽 1
- 사다리 1
- 작업대 1
- 장비 작업장 1
- 청사진 설계소 1
- 자원정 가압기 1
- 점프 패드 1
- U-젤리 착륙 패드 1
- 파이프라인 펌프 Mk.1 1
- 열차 정류장 1
- 블록 신호 1
- 전력 차단기 1
- 콘크리트 63,202
- 강철 빔 17,979
- 석영 수정 17,010
- 구리판 14,070
- 철판 9,536
- 포장된 산업용 빔 8,251
- 고속 전선 5,207
- 보강된 철판 5,114
- 알클래드 알루미늄 판 4,630
- 강철 파이프 3,884
- 철봉 3,318
- 수정 발진기 3,001
- 전선 2,871
- 알루미늄 케이스 2,250
- 케이블 1,599
- 고중량 모듈식 골조 956
- 이산화규소 882
- 고속 커넥터 849
- 회전자 712
- 무선 제어 장치 435
- 플라스틱 386
- 모듈식 골조 365
- 모터 357
- 고무 219
- 인공지능 진폭 제한 회로 210
- 바이오매스 200
- 슈퍼컴퓨터 28
- 컴퓨터 16
- 회로 기판 2
-
Yokmosho - 2024. 4. 2. 오전 2:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 2024. 3. 25. 오후 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 2023. 12. 10. 오전 2:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 2023. 12. 10. 오전 2:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 2023. 12. 9. 오전 3:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 2023. 12. 7. 오전 12:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )