Nuclear swamp stinger power station reactor component. 250,000 MW (part 1 of 2)
---Update note Recent update on 10-2 to move the nitric acid production to the new node location after a recent update move the nitrogen well located west of blue crater by about 100m
The first few survey missions Ficsit sent to Massage-2 (A-B)b noticed a strange power anomaly in the swamp. The first pioneer drop pod sent to the swamp lost it's video feed just after landing; the last image showed a massive uranium infused stinger capable of self nuclear reactions. Ficsit immediately dropped several more Pioneer teams to the swamp with the goal of capturing and harnessing this meta-stinger to power the upcoming space elevator project. Though all 96 pioneers died during there efforts, they managed to build an unrivaled power plant for the next pioneer's arrival.
This massive build project with a 100 reactor power plant is actually 1 piece of the entire nuclear power site. It has the reactors, entire water feed setup, sulfuric and nitric acid production, concrete production, drone relays for bringing in uranium, fuel rod manufacturers, and every part of chain for making uranium cells and recycling nuclear waste. There is actually a companion megaprint titled "Nuclear Swamp Stinger Production Facilities" https://satisfactory-calculator.com/en/megaprints/index/details/id/1467/name/Nuclear+Swamp+Stinger+Production+Facilities that mostly merges with this reactor build. This companion megaprint handles building the non-radioactive components needed for fuel and recycling production, only needing a manual connection of 3 mk5 belts and 2 power cables to activate. It also contains a swamp spanning rail and vehicle bridge.
This power plant segment was designed to run stand alone for those that do not want to add the production factory segment, but needs the following:
15,0000 MW either from a power grid or from stored battery power to kick start all production or pumps before the reactors kick in. -Encased beams = 65 PPM -pressure cubes = 10PPM -electromagnetic control rods = 105 PPM -Silica = 670 PPM -aluminum casing = 180 PPM -batteries = 60 PPM All other resources already produce themselves. The belt connection points have images on signs showing what items need to connect to which belts. Also allow about 5 minutes from supplying outside power to connect needed parts to allow fluid and concrete buildup to start
This is a lot more of an exercise in balancing a massive production chain than beautiful builds, though it definitely has a creative layout and design I did have considerably more intricacy and build design (twisted pipes, more spread out production per pod, hypertube network from the control room to each pod), but the issue was that the blueprint was weighing in at 5.8 MB and had to undergo significant trimming to meet the upload limit. Original construction on the reactor site was done in update 5 before swamp layout changes. Most minor intrusions from the update 6 changes have been worked around, but there is a "perma-spore-tree" that is going through the central platform that couldn't be avoided or worked around. Be gentle in the ratings, there are a lot of "floating platforms and exposed belts in the structure along with some overclocked factory machines to reduce blueprint items; I had limited wiggle room to play with to meet the upload limit.
I can be reached at Yokmosho on Discord with any issues encountered, comments, ect.
- Esineiden määrä 59 009
- Koordinaatit 118 516 / −3 967
- Liitä vain alkuperäiseen sijaintiin Yes
- Kategoriat Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 7 UPDATE 8
- Luotu 28.8.2023 1.16.14
- Last updated on 3.10.2023 2.46.01
- Perusseinä 4m 9 171
- Perustus 1m 5 698
- Kuusiokehysikkuna 4 656
- Pieni metallipilari 3 990
- Katto 1m 3 165
- Seinäkehys 2 820
- Perusseinä 4m 2 560
- Perustus 1m 2 031
- Putkisto V.2 1 894
- Kuljetinhihna V.5 1 621
- Tuplaramppi 4m 1 386
- Perustuksen kehikko 1 335
- Sähkölinja 1 290
- Tasainen katto 1 195
- Pinottava Putkisto Kannake 972
- Perusseinä 4m 971
- Perustus 1m 893
- Katto 1m 800
- Kuljetinhissi V.1 676
- Kuljetinhissin läpivienti lattiaan 606
- Putkisto V.1 601
- Kuljetinhissi Mk.5 588
- Tasainen katto 495
- Putkistoliitos risti 426
- Kuljetinpylväs 405
- Käänt. kulma ylös 1m 400
- Kuljetinhihna V.1 383
- Tuplaramppi 8m 370
- Tuplaramppi 4m 370
- Kuljettimen jakaja 318
- Käänt. ramppi 2m 316
- Putken läpivienti lattiaan 283
- Kuljettimen yhdistäjä 273
- Maalattu palkki 260
- Palkkiliitin 240
- Seinäkiinnike V.1 226
- Vesipumppu 219
- Perustus 2m 206
- Putken tuki 192
- Pystykyltti 180
- Pieni mainostaulu 176
- Tasainen katto 170
- Sähköpylväs V.1 155
- Rampin kehikko 148
- Pinottava kuljetinpylväs 135
- Rampin seinä 8m 118
- Älykäs jakaja 117
- Kallistettu seinä 8m 115
- Rampin kehikko ylösalaisin 110
- Kallistettu seinä 8m 110
- Käänt. rampin seinä 8m 107
- Putkistopumppu V.2 106
- Valonheitintorni 100
- Ydinvoimala 100
- Sekoitin 81
- Valmistaja 50
- Putken seinätuki 47
- Ramppi 2m 46
- Tasainen katto 45
- Kuljetinhihna V.2 41
- Metallipalkki 40
- Jalostamo 40
- Sähköpylväs V.3 38
- Rakentaja 35
- Kuljettimen kattokannake 33
- Ramppi 2m 29
- Kuljettimen seinäkannake 29
- Katto 4m 25
- Käänt. kulma ylös 1m 21
- Tuplaramppi 8m 20
- Perustus 4m 20
- Kallistettu seinä 4m 20
- Täyskehysikkuna 19
- Hiukkaskiihdytin 18
- Kuljetinseinä x1 17
- Lennokkikenttä 16
- Pakkaaja 14
- Sähköpylväs V.2 14
- Kokoaja 12
- Kaksipuolinen seinäkiinnike V.1 12
- Ramppi 1m 11
- Valojen hallintapaneeli 11
- Tuplaramppi 8m 10
- Ramppi 4m 10
- Ramppi 4m 10
- Käänt. ramppi 2m 10
- Perustus 2m 10
- Käänt. ramppi 1m 10
- Käänt. kulma ylös 1m 10
- Perustus 1m 10
- Kallistettu seinä 4m 10
- Kuljetinseinä x3 10
- Perusseinä 1m 10
- Putkisto V.1 (ei osoitinta) 10
- Katto 2m 9
- Kaivaja V.3 9
- Puolikas 1m Perustus 8
- Pieni betonipilari 8
- Resurssilähteen Keräin 7
- Neliökyltti 0.5m 6
- Automaattinen portti 4
- Rampin seinä 1m 4
- Varastokontti 4
- Ohjelmoitava jakaja 4
- Kyltti 2m 3
- AWESOME Nielu 3
- Putkisto V.2 (ei osoitinta) 3
- Tuplaramppi 2m 2
- Pieni pilarin tuki 2
- Rampin seinä 2m 2
- Kuljetinseinä x2 2
- Tikkaat 2
- Käänt. ramppi 4m 1
- Puolikas 1m Perustus 1
- Katto 1m 1
- Kattovalaisin 1
- Rampin seinä 4m 1
- Kyltti 4m 1
- Kaivaja V.2 1
- Resurssilähteen Paineistaja 1
- Maalämpögeneraattori 1
- Sähkövarasto 1
- Teollinen varastokontti 1
- Kuljetinhissi V.4 1
- Betoni 142 523
- Teräspalkki 23 931
- Kaapeli 15 026
- Rautalevy 13 883
- Duralumiinilevy 13 597
- Kuparipelti 12 859
- Piidioksidi 9 350
- Rautatanko 5 676
- Muovi 5 455
- Alumiinikotelo 4 850
- Raskas Moduulikehys 4 150
- Vahvistettu rautalevy 3 451
- Pikajohto 2 786
- Moottori 2 536
- Roottori 2 472
- Koteloitu teollisuuspalkki 2 214
- Kvartsikide 1 816
- Sähkömagneettinen säätösauva 1 800
- Teräsputki 1 793
- Johto 1 781
- Radio-ohjaus yksikkö 1 015
- Jäähdytinjärjestelmä 900
- Supertietokone 737
- Fuusioitu moduulikehys 450
- Suurnopeusliitin 439
- Kumi 384
- Turbomoottori 207
- Kideoskillaattori 176
- Tekoälyn rajoitin 150
- Kannettava Kaivaja 29
- Modulaarinen kehys 20
- Staattori 5
-
Yokmosho - 2.1.2024 15.55.52
I worked quite a bit with GrOOvER regarding the backing up of waste and overall cascade failure. My testing did not reproduce the same result, but the server GrOOvER had the powerplant running on had a Smart splitter and a Programmable splitter located in a pretty critical area spontaneously fail to function. Deleting them and replacing them fixed the issue. This was in the production half of the megaprint, not the powerplant half. I'll have an updated print uploaded with these splitters deleted and readded
-
gOOvER - 27.12.2023 7.03.53
I like the design and spent 12 hours yesterday trying to bring order to the quaos. Unfortunately this is not possible. Everything is also full of nuclear waste and all the belts are blocked.
Super design, but implementation is misserable. Therefore only 2 stars
-
Yokmosho - 14.9.2023 17.05.29
DoeBIG:
I am fully aware of the belt and pipe spaghetti mess mainly limited to the main area of the “wet factory” and leading into the transfer room for the integration between the 2 halves of the print. The original build was much cleaner and more streamlined, but I ran into several issues:
- The entire factory was build on production lines filling and going to the next phase as it was built. Running it from a completely empty state was a disaster and had to have a lot of reformatting with overflows and backflows to stabilize. I attempted to do some tidying up after everything was working, but that hit the biggest and next issue polish
- Upload size: I’m not exaggerating in saying that had to do a massive amount of cuts to fit the megaprint upload limits. I had to remove walls, have less power connectors and string cables all over the place, ect. to trim every object I could to lower size. Several of those “spaghetti knots” of cables would have required extra walls, ceiling and wall belt supports, and lots of short belt segments to straighten out; I just didn’t have the file size overhead to play with and had to leave an uncomfortable number of long floating belts.. If a nice clean setup is all your looking for, I have a project in the works that is a main storage and delivery base, along with an ammo factory. It has a much smaller file size and is leaving a lot more room for.
-
DoeBIG - 8.9.2023 22.02.22
Interested building, amazing bridge and then you found awful interior. Spaghetti belts and pipes. Same with cables...what is wrong with you mate, why you did not build at least pipes and belts correctly? Wanted to try power plants, but after integrating and looking inside amazing building, i was disgusted and deleted it So i cant confirm functionality.
-
Yokmosho - 4.9.2023 4.51.04
I found the issue regarding a few smart spitters not behaving correctly and causing a slow water buildup on the recycling line. I've tested past 8 hours with no issues found so far. Please redownload the updated megaprint to correct the fault.
-
Andreas61 - 2.9.2023 12.45.53
Does not work. It starts as described, then after 6-7 hours of operation it stops and that's it.