Nuclear swamp stinger power station reactor component. 250,000 MW (part 1 of 2)
---Update note Recent update on 10-2 to move the nitric acid production to the new node location after a recent update move the nitrogen well located west of blue crater by about 100m
The first few survey missions Ficsit sent to Massage-2 (A-B)b noticed a strange power anomaly in the swamp. The first pioneer drop pod sent to the swamp lost it's video feed just after landing; the last image showed a massive uranium infused stinger capable of self nuclear reactions. Ficsit immediately dropped several more Pioneer teams to the swamp with the goal of capturing and harnessing this meta-stinger to power the upcoming space elevator project. Though all 96 pioneers died during there efforts, they managed to build an unrivaled power plant for the next pioneer's arrival.
This massive build project with a 100 reactor power plant is actually 1 piece of the entire nuclear power site. It has the reactors, entire water feed setup, sulfuric and nitric acid production, concrete production, drone relays for bringing in uranium, fuel rod manufacturers, and every part of chain for making uranium cells and recycling nuclear waste. There is actually a companion megaprint titled "Nuclear Swamp Stinger Production Facilities" https://satisfactory-calculator.com/en/megaprints/index/details/id/1467/name/Nuclear+Swamp+Stinger+Production+Facilities that mostly merges with this reactor build. This companion megaprint handles building the non-radioactive components needed for fuel and recycling production, only needing a manual connection of 3 mk5 belts and 2 power cables to activate. It also contains a swamp spanning rail and vehicle bridge.
This power plant segment was designed to run stand alone for those that do not want to add the production factory segment, but needs the following:
15,0000 MW either from a power grid or from stored battery power to kick start all production or pumps before the reactors kick in. -Encased beams = 65 PPM -pressure cubes = 10PPM -electromagnetic control rods = 105 PPM -Silica = 670 PPM -aluminum casing = 180 PPM -batteries = 60 PPM All other resources already produce themselves. The belt connection points have images on signs showing what items need to connect to which belts. Also allow about 5 minutes from supplying outside power to connect needed parts to allow fluid and concrete buildup to start
This is a lot more of an exercise in balancing a massive production chain than beautiful builds, though it definitely has a creative layout and design I did have considerably more intricacy and build design (twisted pipes, more spread out production per pod, hypertube network from the control room to each pod), but the issue was that the blueprint was weighing in at 5.8 MB and had to undergo significant trimming to meet the upload limit. Original construction on the reactor site was done in update 5 before swamp layout changes. Most minor intrusions from the update 6 changes have been worked around, but there is a "perma-spore-tree" that is going through the central platform that couldn't be avoided or worked around. Be gentle in the ratings, there are a lot of "floating platforms and exposed belts in the structure along with some overclocked factory machines to reduce blueprint items; I had limited wiggle room to play with to meet the upload limit.
I can be reached at Yokmosho on Discord with any issues encountered, comments, ect.
- 아이템 수 59,009
- 좌표 118,516 / -3,967
- 기본 위치에만 붙여넣기 Yes
- 분류 Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 7 UPDATE 8
- 생성일: 2023. 8. 28. 오전 1:16:14
- 마지막 업데이트: 2023. 10. 3. 오전 2:46:01
- 기본 벽 4m 9,171
- 토대 1m 5,698
- 육각 프레임 창문 4,656
- 소형 금속 기둥 3,990
- 지붕 1m 3,165
- 프레임 벽 2,820
- 기본 벽 4m 2,560
- 토대 1m 2,031
- 파이프라인 Mk.2 1,894
- 컨베이어 벨트 Mk.5 1,621
- 이중 경사로 4m 1,386
- 프레임 토대 1,335
- 송전선 1,290
- 수평 지붕 1,195
- 적층형 파이프라인 지지대 972
- 기본 벽 4m 971
- 토대 1m 893
- 지붕 1m 800
- 컨베이어 리프트 Mk.1 676
- 컨베이어 리프트 바닥 구멍 606
- 파이프라인 Mk.1 601
- 컨베이어 리프트 Mk.5 588
- 수평 지붕 495
- 파이프라인 접합부 426
- 컨베이어 기둥 405
- 역방향 오르막 모퉁이 1m 400
- 컨베이어 벨트 Mk.1 383
- 이중 경사로 8m 370
- 이중 경사로 4m 370
- 컨베이어 분배기 318
- 역방향 경사로 2m 316
- 파이프라인 바닥 구멍 283
- 컨베이어 병합기 273
- 도색된 빔 260
- 빔 연결부 240
- 벽 부착형 전신주 Mk.1 226
- 물 추출기 219
- 토대 2m 206
- 파이프라인 지지대 192
- 안내판 180
- 소형 광고판 176
- 수평 지붕 170
- 전신주 Mk.1 155
- 프레임 경사로 148
- 적층형 컨베이어 기둥 135
- 경사로 벽 8m 118
- 선별 분배기 117
- 경사진 벽 8m 115
- 역방향 프레임 경사로 110
- 경사진 벽 8m 110
- 역방향 경사로 벽 8m 107
- 파이프라인 펌프 Mk.2 106
- 투광 조명 타워 100
- 원자력 발전소 100
- 혼합기 81
- 제조기 50
- 파이프라인 벽 지지대 47
- 경사로 2m 46
- 수평 지붕 45
- 컨베이어 벨트 Mk.2 41
- 금속 빔 40
- 정제소 40
- 전신주 Mk.3 38
- 제작기 35
- 컨베이어 천장 지지대 33
- 경사로 2m 29
- 컨베이어 벽 지지대 29
- 지붕 4m 25
- 역방향 오르막 모퉁이 1m 21
- 이중 경사로 8m 20
- 토대 4m 20
- 경사진 벽 4m 20
- 꽉찬 프레임 창문 19
- 입자 가속기 18
- 컨베이어 벽 x1 17
- 드론 포트 16
- 포장기 14
- 전신주 Mk.2 14
- 조립기 12
- 이중 벽 부착형 출력부 Mk.1 12
- 경사로 1m 11
- 조명 제어판 11
- 이중 경사로 8m 10
- 경사로 4m 10
- 경사로 4m 10
- 역방향 경사로 2m 10
- 토대 2m 10
- 역방향 경사로 1m 10
- 역방향 오르막 모퉁이 1m 10
- 토대 1m 10
- 경사진 벽 4m 10
- 컨베이어 벽 x3 10
- 기본 벽 1m 10
- 파이프라인 Mk.1 (유량기 없음) 10
- 지붕 2m 9
- 채굴기 Mk.3 9
- 절반 토대 1m 8
- 소형 콘크리트 기둥 8
- 자원정 추출기 7
- 사각 전광판 0.5m 6
- 자동화 게이트 4
- 경사로 벽 1m 4
- 저장 컨테이너 4
- 다중 선별 분배기 4
- 라벨 전광판 2m 3
- A.W.E.S.O.M.E. 싱크 3
- 파이프라인 Mk.2 (유량기 없음) 3
- 이중 경사로 2m 2
- 소형 기둥 지지대 2
- 경사로 벽 2m 2
- 컨베이어 벽 x2 2
- 사다리 2
- 역방향 경사로 4m 1
- 절반 토대 1m 1
- 지붕 1m 1
- 천장등 1
- 경사로 벽 4m 1
- 라벨 전광판 4m 1
- 채굴기 Mk.2 1
- 자원정 가압기 1
- 지열 발전기 1
- 전력 저장고 1
- 산업용 저장 컨테이너 1
- 컨베이어 리프트 Mk.4 1
- 콘크리트 142,523
- 강철 빔 23,931
- 케이블 15,026
- 철판 13,883
- 알클래드 알루미늄 판 13,597
- 구리판 12,859
- 이산화규소 9,350
- 철봉 5,676
- 플라스틱 5,455
- 알루미늄 케이스 4,850
- 고중량 모듈식 골조 4,150
- 보강된 철판 3,451
- 고속 전선 2,786
- 모터 2,536
- 회전자 2,472
- 포장된 산업용 빔 2,214
- 석영 수정 1,816
- 전자기 제어봉 1,800
- 강철 파이프 1,793
- 전선 1,781
- 무선 제어 장치 1,015
- 냉각 시스템 900
- 슈퍼컴퓨터 737
- 융합된 모듈식 골조 450
- 고속 커넥터 439
- 고무 384
- 터보 모터 207
- 수정 발진기 176
- 인공지능 진폭 제한 회로 150
- 휴대용 채굴기 29
- 모듈식 골조 20
- 고정자 5
-
Yokmosho - 2024. 1. 2. 오후 3:55:52
I worked quite a bit with GrOOvER regarding the backing up of waste and overall cascade failure. My testing did not reproduce the same result, but the server GrOOvER had the powerplant running on had a Smart splitter and a Programmable splitter located in a pretty critical area spontaneously fail to function. Deleting them and replacing them fixed the issue. This was in the production half of the megaprint, not the powerplant half. I'll have an updated print uploaded with these splitters deleted and readded
-
gOOvER - 2023. 12. 27. 오전 7:03:53
I like the design and spent 12 hours yesterday trying to bring order to the quaos. Unfortunately this is not possible. Everything is also full of nuclear waste and all the belts are blocked.
Super design, but implementation is misserable. Therefore only 2 stars
-
Yokmosho - 2023. 9. 14. 오후 5:05:29
DoeBIG:
I am fully aware of the belt and pipe spaghetti mess mainly limited to the main area of the “wet factory” and leading into the transfer room for the integration between the 2 halves of the print. The original build was much cleaner and more streamlined, but I ran into several issues:
- The entire factory was build on production lines filling and going to the next phase as it was built. Running it from a completely empty state was a disaster and had to have a lot of reformatting with overflows and backflows to stabilize. I attempted to do some tidying up after everything was working, but that hit the biggest and next issue polish
- Upload size: I’m not exaggerating in saying that had to do a massive amount of cuts to fit the megaprint upload limits. I had to remove walls, have less power connectors and string cables all over the place, ect. to trim every object I could to lower size. Several of those “spaghetti knots” of cables would have required extra walls, ceiling and wall belt supports, and lots of short belt segments to straighten out; I just didn’t have the file size overhead to play with and had to leave an uncomfortable number of long floating belts.. If a nice clean setup is all your looking for, I have a project in the works that is a main storage and delivery base, along with an ammo factory. It has a much smaller file size and is leaving a lot more room for.
-
DoeBIG - 2023. 9. 8. 오후 10:02:22
Interested building, amazing bridge and then you found awful interior. Spaghetti belts and pipes. Same with cables...what is wrong with you mate, why you did not build at least pipes and belts correctly? Wanted to try power plants, but after integrating and looking inside amazing building, i was disgusted and deleted it So i cant confirm functionality.
-
Yokmosho - 2023. 9. 4. 오전 4:51:04
I found the issue regarding a few smart spitters not behaving correctly and causing a slow water buildup on the recycling line. I've tested past 8 hours with no issues found so far. Please redownload the updated megaprint to correct the fault.
-
Andreas61 - 2023. 9. 2. 오후 12:45:53
Does not work. It starts as described, then after 6-7 hours of operation it stops and that's it.