Nuclear swamp stinger power station reactor component. 250,000 MW (part 1 of 2)
---Update note Recent update on 10-2 to move the nitric acid production to the new node location after a recent update move the nitrogen well located west of blue crater by about 100m
The first few survey missions Ficsit sent to Massage-2 (A-B)b noticed a strange power anomaly in the swamp. The first pioneer drop pod sent to the swamp lost it's video feed just after landing; the last image showed a massive uranium infused stinger capable of self nuclear reactions. Ficsit immediately dropped several more Pioneer teams to the swamp with the goal of capturing and harnessing this meta-stinger to power the upcoming space elevator project. Though all 96 pioneers died during there efforts, they managed to build an unrivaled power plant for the next pioneer's arrival.
This massive build project with a 100 reactor power plant is actually 1 piece of the entire nuclear power site. It has the reactors, entire water feed setup, sulfuric and nitric acid production, concrete production, drone relays for bringing in uranium, fuel rod manufacturers, and every part of chain for making uranium cells and recycling nuclear waste. There is actually a companion megaprint titled "Nuclear Swamp Stinger Production Facilities" https://satisfactory-calculator.com/en/megaprints/index/details/id/1467/name/Nuclear+Swamp+Stinger+Production+Facilities that mostly merges with this reactor build. This companion megaprint handles building the non-radioactive components needed for fuel and recycling production, only needing a manual connection of 3 mk5 belts and 2 power cables to activate. It also contains a swamp spanning rail and vehicle bridge.
This power plant segment was designed to run stand alone for those that do not want to add the production factory segment, but needs the following:
15,0000 MW either from a power grid or from stored battery power to kick start all production or pumps before the reactors kick in. -Encased beams = 65 PPM -pressure cubes = 10PPM -electromagnetic control rods = 105 PPM -Silica = 670 PPM -aluminum casing = 180 PPM -batteries = 60 PPM All other resources already produce themselves. The belt connection points have images on signs showing what items need to connect to which belts. Also allow about 5 minutes from supplying outside power to connect needed parts to allow fluid and concrete buildup to start
This is a lot more of an exercise in balancing a massive production chain than beautiful builds, though it definitely has a creative layout and design I did have considerably more intricacy and build design (twisted pipes, more spread out production per pod, hypertube network from the control room to each pod), but the issue was that the blueprint was weighing in at 5.8 MB and had to undergo significant trimming to meet the upload limit. Original construction on the reactor site was done in update 5 before swamp layout changes. Most minor intrusions from the update 6 changes have been worked around, but there is a "perma-spore-tree" that is going through the central platform that couldn't be avoided or worked around. Be gentle in the ratings, there are a lot of "floating platforms and exposed belts in the structure along with some overclocked factory machines to reduce blueprint items; I had limited wiggle room to play with to meet the upload limit.
I can be reached at Yokmosho on Discord with any issues encountered, comments, ect.
- Items count 59 009
- Coordinates 118 516 / −3 967
- Only paste on original location Yes
- Kategorier Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 7 UPDATE 8
- Created on 28. aug. 2023, 01:16:14
- Last updated on 3. okt. 2023, 02:46:01
- Standard FICSIT-vegg 4m 9 171
- FICSIT-fundament 1m 5 698
- Sekskantede vindusrammer 4 656
- Liten betongpilar 3 990
- Metalltak 1m 3 165
- Rammevegg 2 820
- Standard FICSIT-vegg 4m 2 560
- FICSIT-fundament 1m 2 031
- Rørledning Mk.2 1 894
- Transportbånd Mk.5 1 621
- Dobbel FICSIT-rampe 4m 1 386
- Rammefundament 1 335
- Kraftlinje 1 290
- Flatt metalltak 1 195
- Stabelbar rørstøtte 972
- Standard FICSIT-vegg 4m 971
- FICSIT-fundament 1m 893
- Metalltak 1m 800
- Transportbåndheis Mk.1 676
- Gulvhull for transportbåndheis 606
- Rørledning Mk.1 601
- Transportbåndheis Mk.5 588
- Flatt metalltak 495
- Rørkryss 426
- Transportbånd stolpe 405
- Invertert oppgående FICSIT-hjørnerampe 1m 400
- Transportbånd Mk.1 383
- Dobbel FICSIT-rampe 8m 370
- Dobbel FICSIT-rampe 4m 370
- Transportbånd splitter 318
- Invertert FICSIT-rampe 2m 316
- Gulvhull for rørledning 283
- Transportbånd samler 273
- Malt bjelke 260
- Bjelketilkobling 240
- Veggpol Mk.1 226
- Vannsamler 219
- FICSIT-fundament 2m 206
- Rørledningstolpe 192
- Portrettskilt 180
- Liten reklametavle 176
- Flatt metalltak 170
- Strømstolpe Mk.1 155
- Rammerampe 148
- Stabelbar båndstøtte 135
- Triangel-FICSIT-vegg 8m 118
- Smart splitter 117
- Skråstilt FICSIT-vegg 8m 115
- Invertert rammerampe 110
- Skråstilt FICSIT-vegg 8m 110
- Invertert triangel-FICSIT-vegg 8m 107
- Rørledningspumpe Mk.2 106
- Flomlys mast 100
- Atomkraftverk 100
- Blander 81
- Produsent 50
- Rørledningstøtte for vegg 47
- FICSIT-rampe 2m 46
- Flatt metalltak 45
- Transportbånd Mk.2 41
- Metallbjelke 40
- Raffineri 40
- Strømstolpe Mk.3 38
- Konstruktør 35
- Båndstøtte for himling 33
- FICSIT-rampe 2m 29
- Båndstøtte for vegg 29
- Tak 4m 25
- Invertert oppgående FICSIT-hjørnerampe 1m 21
- Dobbel FICSIT-rampe 8m 20
- FICSIT-fundament 4m 20
- Standard metallvegg 4m 20
- Hellglass vindu 19
- Partikkelakselerator 18
- Transportbånd-FICSIT-vegg x1 17
- Droneplatform 16
- Tapper 14
- Strømstolpe Mk.2 14
- Montør 12
- Dobbel veggpol Mk.1 12
- FICSIT-rampe 1m 11
- Kontrollpanel for lys 11
- Dobbel FICSIT-rampe 8m 10
- FICSIT-rampe 3m 10
- FICSIT-rampe 3m 10
- Invertert FICSIT-rampe 2m 10
- FICSIT-fundament 2m 10
- Invertert FICSIT-rampe 1m 10
- Invertert oppgående FICSIT-hjørnerampe 1m 10
- FICSIT-fundament 1m 10
- Standard metallvegg 4m 10
- Transportbånd-FICSIT-vegg x3 10
- Standard FICSIT-vegg 1m 10
- Rørledning Mk.1 (Ingen indikator) 10
- Metalltak 2m 9
- Borerigg Mk.3 9
- Halvt FICSIT-fundament 1m 8
- Liten betongpilar 8
- Ressursbrønnutvinner 7
- Firkantet skilt 0,5m 6
- Automatisert port 4
- Triangel-FICSIT-vegg 1m 4
- Lagringskontainer 4
- Programmerbar Splitter 4
- Tittelskilt 2m 3
- EKSPERT-kvern 3
- Rørledning Mk.2 (Ingen indikator) 3
- Dobbel FICSIT-rampe 2m 2
- Liten pilar støtte 2
- Triangel-FICSIT-vegg 2m 2
- Transportbånd-FICSIT-vegg x2 2
- Stige 2
- Invertert FICSIT-rampe 4m 1
- Halvt FICSIT-fundament 1m 1
- Metalltak 1m 1
- Taklampe 1
- Triangel-FICSIT-vegg 4m 1
- Tittelskilt 4m 1
- Borerigg Mk.2 1
- Ressursbrønn-trykksetter 1
- Geotermisk generator 1
- Strømbank 1
- Industriell Lagringskonteiner 1
- Transportbåndheis Mk.4 1
- Betong 142 523
- Stålbjelke 23 931
- Kabel 15 026
- Jernplate 13 883
- Korrosjonsbestandig aluminiumplate 13 597
- Kobber plate 12 859
- Silika 9 350
- Jernstav 5 676
- Plast 5 455
- Aluminiumkabinet 4 850
- Tung modulær ramme 4 150
- Forsterket jernplate 3 451
- Kvikktråd 2 786
- Motor 2 536
- Rotor 2 472
- Innkapslet Stålbjelke 2 214
- Kvartskrystall 1 816
- Elektromagnetisk kontrollstav 1 800
- Stålrør 1 793
- Kobbertråd 1 781
- Radiokontrollenhet 1 015
- Kjølesystem 900
- Superdatamaskin 737
- Sammensveiset modulær ramme 450
- Høyhastighetstilkobling 439
- Gummi 384
- Turbomotor 207
- Krystalloscillator 176
- KI-begrense 150
- Bærbar graver 29
- Modulær ramme 20
- Stator 5
-
Yokmosho - 2. jan. 2024, 15:55:52
I worked quite a bit with GrOOvER regarding the backing up of waste and overall cascade failure. My testing did not reproduce the same result, but the server GrOOvER had the powerplant running on had a Smart splitter and a Programmable splitter located in a pretty critical area spontaneously fail to function. Deleting them and replacing them fixed the issue. This was in the production half of the megaprint, not the powerplant half. I'll have an updated print uploaded with these splitters deleted and readded
-
gOOvER - 27. des. 2023, 07:03:53
I like the design and spent 12 hours yesterday trying to bring order to the quaos. Unfortunately this is not possible. Everything is also full of nuclear waste and all the belts are blocked.
Super design, but implementation is misserable. Therefore only 2 stars
-
Yokmosho - 14. sep. 2023, 17:05:29
DoeBIG:
I am fully aware of the belt and pipe spaghetti mess mainly limited to the main area of the “wet factory” and leading into the transfer room for the integration between the 2 halves of the print. The original build was much cleaner and more streamlined, but I ran into several issues:
- The entire factory was build on production lines filling and going to the next phase as it was built. Running it from a completely empty state was a disaster and had to have a lot of reformatting with overflows and backflows to stabilize. I attempted to do some tidying up after everything was working, but that hit the biggest and next issue polish
- Upload size: I’m not exaggerating in saying that had to do a massive amount of cuts to fit the megaprint upload limits. I had to remove walls, have less power connectors and string cables all over the place, ect. to trim every object I could to lower size. Several of those “spaghetti knots” of cables would have required extra walls, ceiling and wall belt supports, and lots of short belt segments to straighten out; I just didn’t have the file size overhead to play with and had to leave an uncomfortable number of long floating belts.. If a nice clean setup is all your looking for, I have a project in the works that is a main storage and delivery base, along with an ammo factory. It has a much smaller file size and is leaving a lot more room for.
-
DoeBIG - 8. sep. 2023, 22:02:22
Interested building, amazing bridge and then you found awful interior. Spaghetti belts and pipes. Same with cables...what is wrong with you mate, why you did not build at least pipes and belts correctly? Wanted to try power plants, but after integrating and looking inside amazing building, i was disgusted and deleted it So i cant confirm functionality.
-
Yokmosho - 4. sep. 2023, 04:51:04
I found the issue regarding a few smart spitters not behaving correctly and causing a slow water buildup on the recycling line. I've tested past 8 hours with no issues found so far. Please redownload the updated megaprint to correct the fault.
-
Andreas61 - 2. sep. 2023, 12:45:53
Does not work. It starts as described, then after 6-7 hours of operation it stops and that's it.