Nuclear swamp stinger power station reactor component. 250,000 MW (part 1 of 2)
---Update note Recent update on 10-2 to move the nitric acid production to the new node location after a recent update move the nitrogen well located west of blue crater by about 100m
The first few survey missions Ficsit sent to Massage-2 (A-B)b noticed a strange power anomaly in the swamp. The first pioneer drop pod sent to the swamp lost it's video feed just after landing; the last image showed a massive uranium infused stinger capable of self nuclear reactions. Ficsit immediately dropped several more Pioneer teams to the swamp with the goal of capturing and harnessing this meta-stinger to power the upcoming space elevator project. Though all 96 pioneers died during there efforts, they managed to build an unrivaled power plant for the next pioneer's arrival.
This massive build project with a 100 reactor power plant is actually 1 piece of the entire nuclear power site. It has the reactors, entire water feed setup, sulfuric and nitric acid production, concrete production, drone relays for bringing in uranium, fuel rod manufacturers, and every part of chain for making uranium cells and recycling nuclear waste. There is actually a companion megaprint titled "Nuclear Swamp Stinger Production Facilities" https://satisfactory-calculator.com/en/megaprints/index/details/id/1467/name/Nuclear+Swamp+Stinger+Production+Facilities that mostly merges with this reactor build. This companion megaprint handles building the non-radioactive components needed for fuel and recycling production, only needing a manual connection of 3 mk5 belts and 2 power cables to activate. It also contains a swamp spanning rail and vehicle bridge.
This power plant segment was designed to run stand alone for those that do not want to add the production factory segment, but needs the following:
15,0000 MW either from a power grid or from stored battery power to kick start all production or pumps before the reactors kick in. -Encased beams = 65 PPM -pressure cubes = 10PPM -electromagnetic control rods = 105 PPM -Silica = 670 PPM -aluminum casing = 180 PPM -batteries = 60 PPM All other resources already produce themselves. The belt connection points have images on signs showing what items need to connect to which belts. Also allow about 5 minutes from supplying outside power to connect needed parts to allow fluid and concrete buildup to start
This is a lot more of an exercise in balancing a massive production chain than beautiful builds, though it definitely has a creative layout and design I did have considerably more intricacy and build design (twisted pipes, more spread out production per pod, hypertube network from the control room to each pod), but the issue was that the blueprint was weighing in at 5.8 MB and had to undergo significant trimming to meet the upload limit. Original construction on the reactor site was done in update 5 before swamp layout changes. Most minor intrusions from the update 6 changes have been worked around, but there is a "perma-spore-tree" that is going through the central platform that couldn't be avoided or worked around. Be gentle in the ratings, there are a lot of "floating platforms and exposed belts in the structure along with some overclocked factory machines to reduce blueprint items; I had limited wiggle room to play with to meet the upload limit.
I can be reached at Yokmosho on Discord with any issues encountered, comments, ect.
- Hoeveelheid spullen 59.009
- Coördinaten 118.516 / -3.967
- Alleen plakken op originele locatie Yes
- Categorieën Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 7 UPDATE 8
- Created on 28 aug. 2023 01:16:14
- Last updated on 3 okt. 2023 02:46:01
- Standaard Muur 4m 9.171
- Fundering 1m 5.698
- Zeshoekig Frame Raam 4.656
- Kleine Metalen Pilaar 3.990
- 1m Dak 3.165
- Frame Muur 2.820
- Standaard Muur 4m 2.560
- Fundering 1m 2.031
- Pijpleiding Mk.2 1.894
- Transportband Mk.5 1.621
- Dubbele Helling 4m 1.386
- Frame Fundering 1.335
- Stroomkabel 1.290
- Plat Dak 1.195
- Stapelbare Pijpleidingsondersteuning 972
- Standaard Muur 4m 971
- Fundering 1m 893
- 1m Dak 800
- Transportlift Mk.1 676
- Vloergat Transportlift 606
- Pijpleiding Mk.1 601
- Transportlift Mk.5 588
- Plat Dak 495
- Pijpleidingskruispunt 426
- Ondersteuning Transportband 405
- Omgekeerde Hoek Omhoog 1m 400
- Transportband Mk.1 383
- Dubbele Helling 8m 370
- Dubbele Helling 4m 370
- Transportbandverdeler 318
- Omgekeerde Helling 2m 316
- Vloergat Pijpleiding 283
- Transportband samenvoeger 273
- Gespoten Balk 260
- Balk Verbindingspunt 240
- Wandcontact Mk.1 226
- Water-extractor 219
- Fundering 2m 206
- Pijpleidingsondersteuning 192
- Portret Bord 180
- Klein Reclamebord 176
- Plat Dak 170
- Energiemast Mk.1 155
- Frame helling 148
- Stapelbare Ondersteuning Transportband 135
- Hellingmuur 8m 118
- Intelligente verdeler 117
- Gekantelde Muur 8m 115
- Omgekeerde Frame Helling 110
- Gekantelde Muur 8m 110
- Omgekeerde Hellingmuur 8m 107
- Pijpleidingspomp Mk.2 106
- Schijnwerpertoren 100
- Kernreactor 100
- mixer 81
- Fabrikator 50
- Pijpleiding muurondersteuning 47
- Helling 2m 46
- Plat Dak 45
- Transportband Mk.2 41
- Metalen Balk 40
- Raffinaderij 40
- Hoogspanningsmast Mk.3 38
- Samensteller 35
- Transportband Plafondmontage 33
- Helling 2m 29
- Muurbevestigingspunt Transportband 29
- 4m Dak 25
- Omgekeerde Hoek Omhoog 1m 21
- Dubbele Helling 8m 20
- Fundering 4m 20
- Gekantelde Muur 4m 20
- Volledig Frame Raam 19
- Deeltjesversneller 18
- Transportbandmuur x1 17
- Dronehaven 16
- Verpakkingsmachine 14
- Hoogspanningsmast Mk.2 14
- Assembleerder 12
- Hoogspanningsmast Dubbel Muur Mk.1 12
- Helling 1m 11
- Lichtbedieningspaneel 11
- Dubbele Helling 8m 10
- Helling 4m 10
- Helling 4m 10
- Omgekeerde Helling 2m 10
- Fundering 2m 10
- Omgekeerde Helling 1m 10
- Omgekeerde Hoek Omhoog 1m 10
- Fundering 1m 10
- Gekantelde Muur 4m 10
- Transportbandmuur x3 10
- Standaard Muur 1m 10
- Pijpleiding Mk.1 (Geen Indicator) 10
- 2m Dak 9
- Delver Mk.3 9
- Halve 1m Fundering 8
- Kleine Betonnen Pilaar 8
- Springbronontginner 7
- Vierkant Bord 0.5m 6
- Geautomatiseerde Poort 4
- Hellingmuur 1m 4
- Opslagcontainer 4
- Programmeerbare verdeler 4
- Labelbord 2m 3
- AWESOME-Stort 3
- Pijpleiding Mk.2 (Geen Indicator) 3
- Dubbele Helling 2m 2
- Kleine Pilaarondersteuning 2
- Hellingmuur 2m 2
- Transportbandmuur x2 2
- Ladder 2
- Omgekeerde Helling 4m 1
- Halve 1m Fundering 1
- 1m Dak 1
- Plafondlamp 1
- Hellingmuur 4m 1
- Labelbord 4m 1
- Delver Mk.2 1
- Springbrondrukregelaar 1
- Generator geothermisch 1
- Energie Opslag 1
- Industriële opslagcontainer 1
- Transportlift Mk.4 1
- Beton 142.523
- Stalen balk 23.931
- Kabel 15.026
- IJzeren plaat 13.883
- Alclad aluminiumplaat 13.597
- Koperplaat 12.859
- Silica 9.350
- IJzeren Stang 5.676
- Plastic 5.455
- Aluminium behuizing 4.850
- Zwaar modulair frame 4.150
- Versterkte ijzeren plaat 3.451
- Hogesnelheidsdraad 2.786
- motor 2.536
- rotor 2.472
- Gewapend betonnen balk 2.214
- Kwartskristal 1.816
- Elektromagnetische regelstaaf 1.800
- Stalen pijp 1.793
- Draad 1.781
- Radiografische controle-eenheid 1.015
- Koelsysteem 900
- Supercomputer 737
- Gefuseerd Modulair Frame 450
- Hogesnelheidsverbinding 439
- Rubber 384
- Turbomotor 207
- Kristaloscillator 176
- KI-begrenzer 150
- Draagbare delver 29
- Modulair frame 20
- stator 5
-
Yokmosho - 2 jan. 2024 15:55:52
I worked quite a bit with GrOOvER regarding the backing up of waste and overall cascade failure. My testing did not reproduce the same result, but the server GrOOvER had the powerplant running on had a Smart splitter and a Programmable splitter located in a pretty critical area spontaneously fail to function. Deleting them and replacing them fixed the issue. This was in the production half of the megaprint, not the powerplant half. I'll have an updated print uploaded with these splitters deleted and readded
-
gOOvER - 27 dec. 2023 07:03:53
I like the design and spent 12 hours yesterday trying to bring order to the quaos. Unfortunately this is not possible. Everything is also full of nuclear waste and all the belts are blocked.
Super design, but implementation is misserable. Therefore only 2 stars
-
Yokmosho - 14 sep. 2023 17:05:29
DoeBIG:
I am fully aware of the belt and pipe spaghetti mess mainly limited to the main area of the “wet factory” and leading into the transfer room for the integration between the 2 halves of the print. The original build was much cleaner and more streamlined, but I ran into several issues:
- The entire factory was build on production lines filling and going to the next phase as it was built. Running it from a completely empty state was a disaster and had to have a lot of reformatting with overflows and backflows to stabilize. I attempted to do some tidying up after everything was working, but that hit the biggest and next issue polish
- Upload size: I’m not exaggerating in saying that had to do a massive amount of cuts to fit the megaprint upload limits. I had to remove walls, have less power connectors and string cables all over the place, ect. to trim every object I could to lower size. Several of those “spaghetti knots” of cables would have required extra walls, ceiling and wall belt supports, and lots of short belt segments to straighten out; I just didn’t have the file size overhead to play with and had to leave an uncomfortable number of long floating belts.. If a nice clean setup is all your looking for, I have a project in the works that is a main storage and delivery base, along with an ammo factory. It has a much smaller file size and is leaving a lot more room for.
-
DoeBIG - 8 sep. 2023 22:02:22
Interested building, amazing bridge and then you found awful interior. Spaghetti belts and pipes. Same with cables...what is wrong with you mate, why you did not build at least pipes and belts correctly? Wanted to try power plants, but after integrating and looking inside amazing building, i was disgusted and deleted it So i cant confirm functionality.
-
Yokmosho - 4 sep. 2023 04:51:04
I found the issue regarding a few smart spitters not behaving correctly and causing a slow water buildup on the recycling line. I've tested past 8 hours with no issues found so far. Please redownload the updated megaprint to correct the fault.
-
Andreas61 - 2 sep. 2023 12:45:53
Does not work. It starts as described, then after 6-7 hours of operation it stops and that's it.