Nuclear Swamp Stinger Production Facilities (part 2 of the Swamp stinger nuclear power plant megaprint)
update history 1-3-24: Fixed a user reported stall in a construction area. For some strange reason (and one no testing on my end could replicate), a smart and programmable splitter would randomly stop funtioning after a period of time and eventually choked all production. These splitters have been replaced to hopefully stop this bug from happening.
This is the non-radioactive part production companion megaprint to the Nuclear Swamp Stinger power plant https://satisfactory-calculator.com/en/megaprints/index/details/id/1426/name/Nuclear+swamp+stinger+power+station+reactor+component.++250%2C000+MW++%28part+1+of+2%29. unlike the power plant megaprint, this is designed to mesh and connecting to the powerplant megaprint to deliver all parts needed to go along with producing Uranium fuel rods and recycle nuclear waste. Also contained in this megaprint is a swamp spanning rail and vehicle bridge that is also part factory. When placing both megaprints into the interactive map, I've had the best luck placing the powerplant megaprint first, then the production megaprint.
The idea behind this megaprint was to use as few resources as possible and mainly use nodes only in the swamp; so heavy use of water based alt recipes were used. To start up the reactor section and all production facilities, there are 2 cables and 3 mk. 5 belts that need to be connected. To access the connection room: Travel down the bridge to the central pillar and enter the nuclear facility access door (parking available). Traverse down the stairs and enter the door to the right labeled "To connection room and Site 2." At the end of the hall is the connection access room. Connect a cable from the "Battery tap for jumpstart" to power taps 1 and 2 to power up the factory and the facilities for the Nuclear power plant. You will need to match the belts between the clearly labeled wall connections: sulfur to sulfur, silica to silica, and multipart feed to multipart feed. The battery stack provided enough power to power all facilities until the reactors provide more power than is used. There will be about 900 MW left on the batteries going by tests ran, so there is a little wiggle room for use of hover packs.
The entire factory starts 100% empty and will slowly come up to fully online. During this time, there will be periodic production backups; these are expected and will resolve themselves with time Timeline once powered on:
29 minutes to first powerplant fireup 45 minutes to more power being produced than used 1 hour= powerplant is near 70,000 MW output (safe to start connecting other factories at this point 2 hours = 167,000 MW output 3 hours = 217,000 MW 4 Hours= 250,000 MW ( all production centers should be at max or near max at this point)
I've ran the factory through tests for update 8 experimental. There was a weird glitch where a pipe for water was present when highlighted to delete, but was otherwise invisible and was not passing water. This bug was resolved by replacing the pipe and all tests since then have ran with no issue. Update 8 is not required to make the entire site run, but there is a lot of parts built around using Lumen for lighting, The interior of the factory is not as polished as I would like and is heavily devoid of lighting in many areas, but I was up against the megaprint upload size limit.
I'm on discord at Yokmosho and would would welcome any comments/bug reports.
- Esineiden määrä 43 691
- Koordinaatit 223 522 / 84 376
- Liitä vain alkuperäiseen sijaintiin Yes
- Kategoriat Architecture Complete factory Interior decorations Exterior decorations Pipes system Tracks system UPDATE 7 UPDATE 8
- Luotu 28.8.2023 1.16.29
- Last updated on 3.1.2024 13.41.31
- Perustus 1m 5 454
- Perusseinä 4m 3 354
- Palkkiliitin 2 842
- Metallipalkki 2 617
- Kuljetinhihna V.5 2 444
- Kuusiokehysikkuna 1 795
- Sähkölinja 1 555
- Perusseinä 4m 1 517
- Kuljetinhihna V.1 1 490
- Perusseinä 4m 1 470
- Kuljettimen yhdistäjä 861
- Maalattu palkki 806
- Kuljettimen jakaja 781
- Kuljetinhissi Mk.5 749
- Putkisto V.2 604
- Neliökyltti 1m 513
- Tasainen katto 486
- Putkisto V.1 441
- Perustus 4m 419
- Putkistoliitos risti 347
- Rakentaja 345
- Kuljetinhissin läpivienti lattiaan 322
- Kuljetinpylväs 320
- Moderni kaide 317
- Kuljetinhihna V.2 293
- Iso metallipilari 289
- Kallistettu seinä 8m 279
- Kuljetinhissi V.1 268
- Tuplaramppi 2m 266
- Kuljettimen kattokannake 266
- Jalostamo 262
- Kallistettu seinä 8m 254
- Tasainen katto 245
- Vaakakyltti 239
- Litteä kehikko 221
- Kokoaja 199
- Katto 1m 183
- Täyskehysikkuna 176
- Katto 4m 173
- Putken tuki 164
- Paneeli-ikkuna 157
- Perustus 1m 133
- Huoltosilta suoraan 132
- Kallistettu seinä 8m 126
- Sähkövarasto 125
- Seinäkiinnike V.1 119
- Teollinen kaide 118
- Perusseinä 1m 115
- Putken seinätuki 113
- Perustus 1m 86
- Älykäs jakaja 85
- Katto 1m 79
- Perusseinä 1m 79
- Rampin seinä 8m 77
- Perustus 1m 75
- Pieni mainostaulu 75
- Sähköpylväs V.1 73
- Katto 4m 72
- Pinottava kuljetinpylväs 72
- Kyltti 4m 69
- Kuljetinhihna V.3 68
- Iso betonipilari 66
- Käänt. rampin seinä 8m 66
- Rampin seinä 8m 64
- Iso pilarin tuki 59
- Kaksipuolinen seinäkiinnike V.1 56
- Katto 4m 55
- Liukuhihnahissi V.2 54
- Huoltosilta portaat 53
- Sulattamo 49
- Perusseinä 1m 45
- Käänt. rampin seinä 8m 45
- Vesipumppu 44
- Putken läpivienti 43
- Putken läpivienti lattiaan 43
- Ramppi 1m 40
- Katto 4m 39
- Liukuhihnahissi V.3 38
- Puolikas 1m Perustus 37
- Katuvalo 37
- Tasainen katto 36
- Huoltosilta ramppi 36
- Huoltosilta käännös 34
- Raide 34
- Tasainen katto 32
- Rampin seinä 4m 31
- Rampin seinä 4m 31
- Tikkaat 31
- Ramppi 4m 28
- Valmistaja 28
- Suuri mainostaulu 27
- Kuljettimen seinäkannake 25
- Tuplaramppi 2m 24
- Rampin seinä 1m 24
- Kulkusilta kulma 24
- Kattovalaisin 23
- Kuljetinseinä x1 23
- Valimo 23
- Kulkusilta suora 22
- Putkisto V.1 (ei osoitinta) 22
- Kehyksellinen ikkuna 21
- Ramppi 2m 20
- Käänt. rampin seinä 4m 20
- Käänt. ramppi 2m 18
- Katto 1m 18
- Kallistettu seinä 4m 18
- Rampin seinä 8m 17
- Kulkusilta ramppi 17
- Ramppi 2m 16
- Kuljetinhissi V.4 16
- Rampin seinä 1m 15
- Kaivaja V.3 15
- Kuljetinseinä x3 14
- Seinäkehys 12
- Putkistopumppu V.2 12
- Seinä, ovi sivulla 11
- Perustus 4m 10
- Ramppi 2m 10
- Pieni betonipilari 10
- Kyltti 3m 10
- Kuljetinhihna V.4 10
- Rampin seinä 4m 9
- Katto 2m 8
- Rampin seinä 2m 8
- Vahvistettu ikkuna 8
- Pystykyltti 8
- Tuplaramppi 4m 7
- Katto 2m 7
- Käänt. rampin seinä 8m 7
- Rampin seinä 1m 7
- Sekoitin 7
- Putkisto V.2 (ei osoitinta) 7
- Käänt. rampin seinä 4m 6
- Kallistettu kulmaseinä 8m 6
- Neliökyltti 0.5m 6
- Kyltti 2m 6
- Huoltosilta T-risteys 5
- Käänt. kulma ylös 1m 4
- Katon ulkokulma 2m 4
- Katon ulkokulma 4m 4
- Katon ulkokulma 1m 4
- Kuljetinseinä x2 4
- Kulkusilta T-risteys 4
- AWESOME Nielu 4
- Puolikas 1m Perustus 3
- Valojen hallintapaneeli 3
- Seinävalonheitin 3
- Resurssilähteen Keräin 3
- Ohjelmoitava jakaja 3
- Sähköpylväs V.2 3
- Puolikas 1m Perustus 2
- Katto 2m 2
- Seinä, ovi keskellä 2
- Käänt. rampin seinä 4m 2
- Kallistettu kovera seinä 8m 2
- Seinä, ovi sivulla 2
- Seinä, ovi sivulla 2
- Öljypumppu 2
- Venttiili 2
- Sähköpylväs V.3 2
- Käänt. kulma alas 4m 1
- Käänt. kulma alas 4m 1
- Ramppi 1m 1
- Katon sisäkulma 4m 1
- Katon ulkokulma 4m 1
- Automaattinen portti 1
- Kallistettu kovera seinä 4m 1
- Rampin seinä 2m 1
- Käänt. rampin seinä 2m 1
- Kallistettu seinä 4m 1
- Kuljetinseinä x3 1
- Kuljetinseinä x1 1
- Neliökyltti 2m 1
- Resurssilähteen Paineistaja 1
- Teollinen varastokontti 1
- Henkilökohtainen säilytyslaatikko 1
- Pinottava Putkisto Kannake 1
- Betoni 63 481
- Johto 14 751
- Teräspalkki 11 628
- Kuparipelti 10 392
- Kaapeli 9 537
- Teräsputki 8 941
- Rautalevy 8 791
- Rautatanko 6 371
- Vahvistettu rautalevy 4 394
- Piidioksidi 4 314
- Kvartsikide 4 174
- Duralumiinilevy 3 942
- Koteloitu teollisuuspalkki 3 355
- Moottori 3 007
- Muovi 2 137
- Pikajohto 1 917
- Roottori 1 636
- Modulaarinen kehys 1 480
- Staattori 625
- Raskas Moduulikehys 353
- Alumiinikotelo 350
- Suurnopeusliitin 277
- Kideoskillaattori 210
- Fuusioitu moduulikehys 150
- Tekoälyn rajoitin 94
- Supertietokone 78
- Kumi 64
- Kannettava Kaivaja 45
- Turbomoottori 45
- Radio-ohjaus yksikkö 35
-
Gandalfdabro - 31.10.2023 0.49.47
i figured it out i didn't have the alternate recipe for the particle accelerator sometimes I am dense like that. awesome megaprint though!
-
Yokmosho - 30.10.2023 13.52.52
Gandalfdabro, no issues in any testing or reported by others regarding a crash when connecting power. It's possible a recent update could have introduced a bug, I can check tonight. Are you running update 7 or 8? If you're on discord, I'd love to discuss findings
-
Gandalfdabro - 30.10.2023 8.33.08
when i connect tap 2 my game freezes then closes anyinsight on that maybe I'm missing something
-
Yokmosho - 14.9.2023 17.04.32
DoeBIG:
I am fully aware of the belt and pipe spaghetti mess mainly limited to the main area of the “wet factory” and leading into the transfer room for the integration between the 2 halves of the print. The original build was much cleaner and more streamlined, but I ran into several issues:
- The entire factory was build on production lines filling and going to the next phase as it was built. Running it from a completely empty state was a disaster and had to have a lot of reformatting with overflows and backflows to stabilize. I attempted to do some tidying up after everything was working, but that hit the biggest and next issue polish
- Upload size: I’m not exaggerating in saying that had to do a massive amount of cuts to fit the megaprint upload limits. I had to remove walls, have less power connectors and string cables all over the place, ect. to trim every object I could to lower size. Several of those “spaghetti knots” of cables would have required extra walls, ceiling and wall belt supports, and lots of short belt segments to straighten out; I just didn’t have the file size overhead to play with and had to leave an uncomfortable number of long floating belts.. If a nice clean setup is all your looking for, I have a project in the works that is a main storage and delivery base, along with an ammo factory. It has a much smaller file size and is leaving a lot more room for.
-
WalkerEMC - 12.9.2023 18.27.29
DoeBIG you have discord?
-
DoeBIG - 8.9.2023 22.02.49
Interested building, amazing bridge and then you found awful interior. Spaghetti belts and pipes. Same with cables...what is wrong with you mate, why you did not build at least pipes and belts correctly? Wanted to try power plants, but after integrating and looking inside amazing building, i was disgusted and deleted it So i cant confirm functionality.