Nuclear Swamp Stinger Production Facilities (part 2 of the Swamp stinger nuclear power plant megaprint)
update history 1-3-24: Fixed a user reported stall in a construction area. For some strange reason (and one no testing on my end could replicate), a smart and programmable splitter would randomly stop funtioning after a period of time and eventually choked all production. These splitters have been replaced to hopefully stop this bug from happening.
This is the non-radioactive part production companion megaprint to the Nuclear Swamp Stinger power plant https://satisfactory-calculator.com/en/megaprints/index/details/id/1426/name/Nuclear+swamp+stinger+power+station+reactor+component.++250%2C000+MW++%28part+1+of+2%29. unlike the power plant megaprint, this is designed to mesh and connecting to the powerplant megaprint to deliver all parts needed to go along with producing Uranium fuel rods and recycle nuclear waste. Also contained in this megaprint is a swamp spanning rail and vehicle bridge that is also part factory. When placing both megaprints into the interactive map, I've had the best luck placing the powerplant megaprint first, then the production megaprint.
The idea behind this megaprint was to use as few resources as possible and mainly use nodes only in the swamp; so heavy use of water based alt recipes were used. To start up the reactor section and all production facilities, there are 2 cables and 3 mk. 5 belts that need to be connected. To access the connection room: Travel down the bridge to the central pillar and enter the nuclear facility access door (parking available). Traverse down the stairs and enter the door to the right labeled "To connection room and Site 2." At the end of the hall is the connection access room. Connect a cable from the "Battery tap for jumpstart" to power taps 1 and 2 to power up the factory and the facilities for the Nuclear power plant. You will need to match the belts between the clearly labeled wall connections: sulfur to sulfur, silica to silica, and multipart feed to multipart feed. The battery stack provided enough power to power all facilities until the reactors provide more power than is used. There will be about 900 MW left on the batteries going by tests ran, so there is a little wiggle room for use of hover packs.
The entire factory starts 100% empty and will slowly come up to fully online. During this time, there will be periodic production backups; these are expected and will resolve themselves with time Timeline once powered on:
29 minutes to first powerplant fireup 45 minutes to more power being produced than used 1 hour= powerplant is near 70,000 MW output (safe to start connecting other factories at this point 2 hours = 167,000 MW output 3 hours = 217,000 MW 4 Hours= 250,000 MW ( all production centers should be at max or near max at this point)
I've ran the factory through tests for update 8 experimental. There was a weird glitch where a pipe for water was present when highlighted to delete, but was otherwise invisible and was not passing water. This bug was resolved by replacing the pipe and all tests since then have ran with no issue. Update 8 is not required to make the entire site run, but there is a lot of parts built around using Lumen for lighting, The interior of the factory is not as polished as I would like and is heavily devoid of lighting in many areas, but I was up against the megaprint upload size limit.
I'm on discord at Yokmosho and would would welcome any comments/bug reports.
- Items count 43,691
- Coordinates 223,522 / 84,376
- Only paste on original location Yes
- หมวด Architecture Complete factory Interior decorations Exterior decorations Pipes system Tracks system UPDATE 7 UPDATE 8
- Created on 28 ส.ค. 2023 01:16:29
- Last updated on 3 ม.ค. 2024 13:41:31
- พื้น 1 เมตร 5,454
- กำแพงพื้นฐาน 4 เมตร 3,354
- ขั้วต่อคาน 2,842
- คานเหล็ก 2,617
- สายพานลำเลียง รุ่นที่ 5 2,444
- หน้าต่างกรอบหกเหลี่ยม 1,795
- สายไฟ 1,555
- กำแพงพื้นฐาน 4 เมตร 1,517
- สายพานลำเลียง รุ่นที่ 1 1,490
- กำแพงพื้นฐาน 4 เมตร 1,470
- เครื่องรวมสายพาน 861
- คานเคลือบสี 806
- สายพานลำเลียง 781
- ลิฟต์ลำเลียง รุ่นที่ 5 749
- ท่อลำเลียง รุ่นที่ 2 604
- ป้ายสี่เหลี่ยม 1 เมตร 513
- หลังคาแบน 486
- ท่อลำเลียง รุ่นที่ 1 441
- พื้น 4 เมตร 419
- ท่อลำเลียงทางแยก 347
- เครื่องผลิต 345
- ช่องทะลุพื้นสำหรับลิฟต์ลำเลียง 322
- เสารับสายพาน 320
- ราวรั้วทันสมัย 317
- สายพานลำเลียง รุ่นที่ 2 293
- เสาเหล็กขนาดใหญ่ 289
- กำแพงลาด 8 เมตร 279
- ลิฟต์ลำเลียง รุ่นที่ 1 268
- พื้นลาดสองฝั่ง 2 ม. 266
- เสายึดสายพานแบบติดเพดาน 266
- โรงกลั่น 262
- กำแพงลาด 8 เมตร 254
- หลังคาแบน 245
- ป้ายโฆษณา 239
- พื้นโครง 221
- เครื่องประกอบ 199
- หลังคา 1 ม. 183
- หน้าต่างเต็มโครง 176
- หลังคา 4 ม. 173
- เสารองท่อ 164
- หน้าต่างตาราง 157
- พื้น 1 เมตร 133
- ทางเดินตรง 132
- กำแพงลาด 8 เมตร 126
- เครื่องสำรองไฟ 125
- ขั้วต่อสายไฟรุ่นที่ 1 119
- ราวบันไดอุตสาหกรรม 118
- กำแพงพื้นฐาน 1 เมตร 115
- เสารองท่อติดผนัง 113
- พื้น 1 เมตร 86
- เครื่องคัดแยกอัจฉริยะ 85
- หลังคา 1 ม. 79
- กำแพงพื้นฐาน 1 เมตร 79
- กำแพงเฉียง 8 เมตร 77
- พื้น 1 เมตร 75
- ป้ายโฆษณาขนาดเล็ก 75
- เสาไฟฟ้า รุ่นที่ 1 73
- หลังคา 4 ม. 72
- บันไดลำเลียงแบบวางซ้อนกันได้ 72
- ป้ายชื่อ 4 เมตร 69
- สายพานลำเลียง รุ่นที่ 3 68
- เสาคอนกรีตขนาดใหญ่ 66
- กำแพงเฉียงกลับด้าน 8 เมตร 66
- กำแพงเฉียง 8 เมตร 64
- รองรับเสาขนาดใหญ่ 59
- ขั้วต่อไฟสองฝั่งกำแพง รุ่นที่ 1 56
- หลังคา 4 ม. 55
- ลิฟต์ลำเลียง รุ่นที่ 2 54
- บันไดทางเดิน 53
- เครื่องหลอม 49
- กำแพงพื้นฐาน 1 เมตร 45
- กำแพงเฉียงกลับด้าน 8 เมตร 45
- เครื่องสูบน้ำ 44
- ตัวเชื่อมท่อทะลุกำแพง 43
- ตัวเชื่อมท่อทะลุพิ้น 43
- ทางลาดเอียง 1 เมตร 40
- หลังคา 4 ม. 39
- ลิฟต์ลำเลียง รุ่นที่ 3 38
- พื้นครึ่ง 1 ม. 37
- ไฟทาง 37
- หลังคาแบน 36
- ทางเดินลาด 36
- ทางเดินเลี้ยว 34
- ทางรถไฟ 34
- หลังคาแบน 32
- กำแพงเฉียง 4 เมตร 31
- กำแพงเฉียง 4 เมตร 31
- บันไดลิง 31
- ทางลาดเอียง 4 เมตร 28
- เครื่องประกอบขนาดใหญ่ 28
- ป้ายโฆษณาขนาดใหญ่ 27
- ฐานรองสายพานแบบติดผนัง 25
- พื้นลาดสองฝั่ง 2 ม. 24
- กำแพงเฉียง 1 เมตร 24
- ทางเดินเลี้ยว 24
- ไฟติดเพดาน 23
- กำแพงมีช่องลำเลียง 1 ช่อง 23
- เครื่องหล่อ 23
- ทางเดินตรง 22
- ท่อลำเลียงรุ่นที่ 1 (ไม่มีตัวบ่งชี้) 22
- หน้าต่างแบบมีกรอบ 21
- ทางลาดเอียง 2 เมตร 20
- กำแพงเฉียงกลับด้าน 4 เมตร 20
- ทางลาดกลับด้าน 2 ม. 18
- หลังคา 1 ม. 18
- กำแพงลาด 4 เมตร 18
- กำแพงเฉียง 8 เมตร 17
- ทางเดินลาด 17
- ทางลาดเอียง 2 เมตร 16
- ลิฟต์ลำเลียง รุ่นที่ 4 16
- กำแพงเฉียง 1 เมตร 15
- เครื่องขุดเจาะ รุ่นที่ 3 15
- กำแพงมีช่องลำเลียง 3 ช่อง 14
- กรอบกำแพง 12
- เครื่องปั้มแรงดัน รุ่นที่ 2 12
- กำแพงมีประตูเลื่อน 11
- พื้น 4 เมตร 10
- ทางลาดเอียง 2 เมตร 10
- เสาคอนกรีตขนาดเล็ก 10
- ป้ายชื่อ 3 เมตร 10
- สายพานลำเลียง รุ่นที่ 4 10
- กำแพงเฉียง 4 เมตร 9
- หลังคา 2 ม. 8
- กำแพงเฉียง 2 เมตร 8
- หน้าต่างเสริมแกร่ง 8
- ป้ายโฆษณาแนวตั้ง 8
- พื้นลาดสองฝั่ง 2 ม. 7
- หลังคา 2 ม. 7
- กำแพงเฉียงกลับด้าน 8 เมตร 7
- กำแพงเฉียง 1 เมตร 7
- เครื่องปั่น 7
- ท่อลำเลียงรุ่นที่ 2 (ไม่มีตัวบ่งชี้) 7
- กำแพงเฉียงกลับด้าน 4 เมตร 6
- กำแพงมุมลาด 8 เมตร 6
- ป้ายสี่เหลี่ยม 0.5 เมตร 6
- ป้ายชื่อ 2 เมตร 6
- ทางเดินแบบ 3 ทาง 5
- ทางลาดมุมขึ้นกลับด้าน 1 ม. 4
- หลังคามุมนอก 2 ม. 4
- หลังคามุมนอก 4 ม. 4
- หลังคามุมนอก 1 ม. 4
- กำแพงมีช่องลำเลียง 2 ช่อง 4
- ทางเดินแบบ 3 ทาง 4
- เครื่องแลกคูปอง AWESOME 4
- พื้นครึ่ง 1 ม. 3
- แท่นควบคุมแสงไฟ 3
- ไฟติดผนัง 3
- ตัวแยกทรัพยากร 3
- เครื่องคัดแยกแบบตั้งโปรแกรม 3
- เสาไฟฟ้า รุ่นที่ 2 3
- พื้นครึ่ง 1 ม. 2
- หลังคา 2 ม. 2
- กำแพงประตูตรงกลาง 2
- กำแพงเฉียงกลับด้าน 4 เมตร 2
- กำแพงเว้าเอียง 8 ม. 2
- กำแพงมีประตูเลื่อน 2
- กำแพงมีประตูเลื่อน 2
- เครื่องสกัดน้ำมัน 2
- วาล์ว 2
- เสาไฟฟ้า รุ่นที่ 3 2
- พื้นลาดเอียงมุมกลับด้าน 4 เมตร 1
- พื้นลาดเอียงมุมกลับด้าน 4 เมตร 1
- ทางลาดเอียง 1 เมตร 1
- หลังคามุมใน 4 ม. 1
- หลังคามุมนอก 4 ม. 1
- ประตูอัตโนมัติ 1
- กำแพงเว้าเอียง 4 ม. 1
- กำแพงเฉียง 2 เมตร 1
- กำแพงเฉียงกลับด้าน 2 เมตร 1
- กำแพงลาด 4 เมตร 1
- กำแพงมีช่องลำเลียง 3 ช่อง 1
- กำแพงมีช่องลำเลียง 1 ช่อง 1
- ป้ายสี่เหลี่ยม 2 เมตร 1
- เครื่องอัดแรงดันทรัพยากรอย่างดี 1
- ตู้คอนเทนเนอร์เก็บของระดับโรงงาน 1
- กล่องเก็บของส่วนตัว 1
- บันไดเชื่อมท่อแบบวางซ้อนกันได้ 1
- คอนกรีต 63,481
- ขดลวด 14,751
- คานเหล็กกล้า 11,628
- แผ่นทองแดง 10,392
- สายเคเบิล 9,537
- ท่อเหล็กกล้า 8,941
- เหล็กแผ่น 8,791
- เหล็กเส้น 6,371
- แผ่นเหล็กเสริมแรง 4,394
- ซิลิกา 4,314
- คริสตอลควอตซ์ 4,174
- แผ่นอลูมิเนียมอัลแคลด 3,942
- คานเหล็กหล่อคอนกรีต 3,355
- มอเตอร์ 3,007
- พลาสติก 2,137
- เส้นลวดคุณภาพสูง 1,917
- โรเตอร์ 1,636
- โครงประกอบ 1,480
- สเตเตอร์ 625
- โครงประกอบขนาดใหญ่ 353
- ปลอกอลูมิเนียม 350
- แผงวงจรความเร็วสูง 277
- คริสตัลออสซิลเลเตอร์ 210
- โครงประกอบผสม 150
- แกน AI 94
- ซูเปอร์คอมพิวเตอร์ 78
- ยาง 64
- แท่นขุดเจาะขนาดเล็ก 45
- มอเตอร์เทอร์โบ 45
- อุปกรณ์ควบคุมวิทยุ 35
-
Gandalfdabro - 31 ต.ค. 2023 00:49:47
i figured it out i didn't have the alternate recipe for the particle accelerator sometimes I am dense like that. awesome megaprint though!
-
Yokmosho - 30 ต.ค. 2023 13:52:52
Gandalfdabro, no issues in any testing or reported by others regarding a crash when connecting power. It's possible a recent update could have introduced a bug, I can check tonight. Are you running update 7 or 8? If you're on discord, I'd love to discuss findings
-
Gandalfdabro - 30 ต.ค. 2023 08:33:08
when i connect tap 2 my game freezes then closes anyinsight on that maybe I'm missing something
-
Yokmosho - 14 ก.ย. 2023 17:04:32
DoeBIG:
I am fully aware of the belt and pipe spaghetti mess mainly limited to the main area of the “wet factory” and leading into the transfer room for the integration between the 2 halves of the print. The original build was much cleaner and more streamlined, but I ran into several issues:
- The entire factory was build on production lines filling and going to the next phase as it was built. Running it from a completely empty state was a disaster and had to have a lot of reformatting with overflows and backflows to stabilize. I attempted to do some tidying up after everything was working, but that hit the biggest and next issue polish
- Upload size: I’m not exaggerating in saying that had to do a massive amount of cuts to fit the megaprint upload limits. I had to remove walls, have less power connectors and string cables all over the place, ect. to trim every object I could to lower size. Several of those “spaghetti knots” of cables would have required extra walls, ceiling and wall belt supports, and lots of short belt segments to straighten out; I just didn’t have the file size overhead to play with and had to leave an uncomfortable number of long floating belts.. If a nice clean setup is all your looking for, I have a project in the works that is a main storage and delivery base, along with an ammo factory. It has a much smaller file size and is leaving a lot more room for.
-
WalkerEMC - 12 ก.ย. 2023 18:27:29
DoeBIG you have discord?
-
DoeBIG - 8 ก.ย. 2023 22:02:49
Interested building, amazing bridge and then you found awful interior. Spaghetti belts and pipes. Same with cables...what is wrong with you mate, why you did not build at least pipes and belts correctly? Wanted to try power plants, but after integrating and looking inside amazing building, i was disgusted and deleted it So i cant confirm functionality.